The 4K HDMI Extender over Ethernet consists of a transmitter and a receiver that transmits high-definition audio and video over a local area network using standard TCP/IP protocols. The transmitter and the receiver are connected by a single network cable, which extends the HDMI signal to 150 meters, is compatible with CAT5/5e/6 type cable, and can also realize one-to-many broadcast transmission through a ethernet switch. In addition, it also supports two-way audio, network cable adaptation, automatic adjustment of resolution output, the best display effect, simpler and more convenient. This product is suitable for video conferencing, HD video capture, multimedia education, digital advertising and signage.

Features:

1,the 4K HDMI Extender over Ethernet for 1port 4K HDMI,rs232 and infrared signals over CAT5/5E/CAT6 cable;

2,support HDMI 1.3/HDCP1.1 & 1.2 version;

3,HDMI signal supports 4K/30Hz,1080P/60hz, downward compatible

4, support point-to-point, point-to-multipoint and cascade transmission;

5,support international IEEE802.3 Ethernet standard;

6,0~150m long distance transmission;

7, No software settings, support hot plug;

Product specification:

Panel Diagram

Installation:

1. Connect the HDMI source to the HDMI transmitter with an HDMI cable.

2. Connect the HDMI receiver to the display device with an HDMI cable.

3. Connect the sender and the receiver with a Category 5 or Category 6 (recommended) network cable.

4. Connect the 12V power supply to the device. When the device is powered, the POWER light is on. When the video status light is on, the device starts normally.

Package Information:

Standard package for 1pair 4K HDMI Extender over Ethernet:
1pcs HDMI transmitter&receiver,
2pcs DC12V1A power adaptors
1pcs user manual

All with pearl cotton protection

Connection Diagram:

Point to Point Application:

Point to Multi Points Application