Generator AVR DVR2000E Marathon Used AC Brushless Alternator Generator Voltage Regulation
Specification
- Dvr 2000e marathon generator regulates the output voltage of a brushless, ac generator by controlling the current into the generator exciter field. Input power to the DVR2000E is from a multi-pole, high-frequency, permanent magnet generator (PMG).
- Generator digital AVR DVR 2000E is supplied in an encapsulated package designed for behind-the-panel mounting.
The DVR2000E is held in place by thread-forming screws that thread into its plastic shell. Front panel indicators (LEDs) annunciate regulator status and system conditions. DVR2000E connections are made through quarter-inch, quick-connect terminals on the rear panel. A 9-pin DB-9 type connector on the rear panel provides communication between the DVR2000E and an IBM compatible PC.
Dvr 2000e marathon generator replaced type | |
Sensing Input voltage | 180-240V AC 50/60HZ |
Power input voltage | 180-240V AC 50/60HZ |
Output current | Max 90VD@207AC,Continuous 4A dc,Intermitten 10A for 10s. |
Volts adjustment | ± 8% within 1K Ohm |
UFRO | Slop 17% down to 30Hz |
Volts regulation | ≤ ± 0.25% |
Four control modes: | automatic voltage regulation (AVR), manual or current regulation (FCR), power factor (PF) regulation, and reactive power (VAR) regulation. |
Function List | • Programmable stability settings. |
• Soft start control with an adjustable time setting in AVR control mode. | |
• Overexcitation (OEL) limiting in AVR, VAR, and PF control modes. | |
• Underfrequency (volts/hertz) regulation. | |
• Crowbar circuitry protects the area. | |
• Overtemperature protection. | |
• Three-phase or single-phase generator voltage (RMS) sensing/regulation in AVR mode. | |
• Single-phase generator current sensing for metering and regulation purposes. | |
• current and voltage sensing. |