Cummins Powered Natural Gas Standby Generator Silent Canopy Natural Gas Generator Set
Features :
Standard Requirements for Natural Gas
1. Methane should be at least 95%
2. The natural gas temperature should be between 0-60 ℃
3. No impurity should be in the gas. Water in the gas should be less than 20g/Nm3.
4. Heat value should be at least 8500kcal/m3, if less than this value, the power of the engine will be declined.
• Models with "N" for Natural gas (CNG, PNG, LNG, Shale Gas, Oilfield Associated Gas and Coalmine Gas etc).
• Special configurations for Soundproof Canopy & Container, ATS and Synchronizing Parallel System are available for options.
• Special configuration of CHP, CCHP (trigeneration), Cogeneration are available for options.
Genset | Genset Model | APL-70G | APL-80G |
Rated Power (KW/KVA) | 70/88 | 80/100 | |
Standby Power (KW/KVA) | 77/96 | 88/110 | |
Rated Voltage | 220/380,230/400;etc | ||
Genset Weight open type(kgs) | 1200 | 1200 | |
Genset Size open type (mm) | 2350*1100*1400 | 2350*1100*1400 | |
Engine | Engine Brand | Lovol | Lovol |
Engine Model | 1006TANG | 1006TANG | |
Type | Closed water-cooled,in line,4-stroke,1500RPM | ||
Intake Type | Natural | ||
No. of Cylinder | 4.L | ||
Bore×Stroke(mm) | 100×127 | ||
Piston Speed (m/s) | 7.62 | ||
Compression Ratio | 10.5:01 | ||
Mechanical Governor Rated | ≦5% | ||
Electronical Governor Rated | ≦1% | ||
Noise Level (dBA) | ≦95 | ||
ExhaustTemperature(℃) | 600 | ||
Rated gas Consumption(CUM/kwh) | 0.36 | ||
Displacement(L) | 3.99 | ||
Start method | Electric | ||
Alternator | Alternator Model | UC224G | UC274C |
Rated Output (KW) | 70 | 80 | |
Rated Frequency (Hz) | 50/60 | ||
Power Factor | 0.8 | ||
Winding connection | 3 phase 4 wires connected | ||
Excitation method | Brushless | ||
Insulation class | H |