Dashboard Camera SONYIMX335 ,4K 1080P 2K 3 Channel Triple Camera GPS WiFi Dash Cam Car DVR Vehicle Recorder.
Mode Number | R18 |
DSP | NTK96670 |
Sensor | IMX335+GC2053+IMX335 |
Display | 2''IPS, 240(RGB)x320 |
Lens | Single Lens 4K@30FPS ( interpolation) |
View Angle | 140+125+125 degree |
WIFI | Optional +USD 2.5 |
GPS | Optional +USD5 |
Rear Cam | Can add, +USD20 |
Night Vision | Yes |
Motion detection | Support |
Loop recording | 1 Mins/3 Mins/5 Mins |
Parking Mode | Support |
Lock for urgent | Support |
Interface | MINI USB2.0 |
Power Source | DC 5V 2A |
Battery | 230mAH lithium battery |




【UHD 3 Channel Dash Cam for Cars 】The 3 channel dashcam can be set with three resolutions: ① Ultra HD Front 4K + Rear 2.5K dual cam mode; ② Ultra HD Front 4K + Cabin 1080P dual cam mode; ③ Front 2.5K + Rear 2.5K +Cabin 1080P Three channel mode, which can record the images Front and Rear and inside the car at the same time. All-round protection of your driving, convenient forensics of unexpected accidents, and protection from potential liability issues.
【Built-in GPS & RoadCam APP】The car dash cam 4k will record GPS coordinates, driving route and speed in real time and embed it in the video file, and allow the use of GX Player to play your driving track on the map. After your phone downloads RoadCamAPP, through the WiFi connection, you can view/download the Dash Cam video to the mobile phone in real time without consuming data.
【Night Vision & Adjustable Brightness】Dash cam front and rear cameras equipped with SONY sensors, F1.6 large aperture and WDR technology. The car dash camera can also have amazing night vision ability in low light conditions. In addition, the dashcam can also set the exposure value of the dash cam in the RoadCam APP settings, wireless WiFi to adjust the brightness of the image.
【24/7 parking monitoring】When hardwired kit is powered on, the car dash cam parking monitoring is turned on. When the car is turned off, the dash cam uses the car battery B+ power supply and enters the 1 second 1 frame delay recording state. Until the car starts again, the driving recorder enters the normal recording state.
【Loop Recording & G-Sensor】 Loop Recording automatically overwrites the earliest file and record over it when storage fills up. After the gravity sensor is enabled, when a sudden shake/collision of the car is detected,The dashcam will automatically start recording for 30 seconds and then shut down. the video will be locked and will not be overwritten.