YG15X Various Type Fine-Grained Alloy, It Is Suitable For Products With High Life Expectancy And Has Good Weldability.

The use of cemented carbide strips
Application fields of carbide strips

Carbide strips processed into knives are widely used in ceramics, printing machinery, forestry, rubber, plastics, light textile industry, cigarette machinery, packaging materials, cables, shipbuilding, metallurgical machinery, electronics, leather and other industries, such as circular hard alloys. Alloy blade, asbestos gas cutting machine plastic granulator roll blade, round blade, slitting blade, sheet metal processing blade and other standard and non-standard mechanical blades.

Carbide strips are mainly used for cutting metal, wood, paper and other fields, therefore, their high quality is required to obtain longer life cycle and cutting speed.

Carbide bars are suitable for machining chilled cast iron and alloy steel. It can also be used in the production of precision machining, precision cast iron and wear parts.

Carbide strips have good flexural strength and wear resistance, not only for slow rough turning, heat-resistant Alois milling and semi-finishing of titanium, stainless, low-alloy steels, but also for machining Production of glass fiber reinforced plastic and PCB micro-drilling, etc.

ST07 ISO grade K05, ultra-fine grain, for planers and indexable inserts for hardwoods.

RX20 ISO grade K10, ultra-fine grain, high wear resistance and toughness, suitable for woodworking tools such as hardwood, particleboard, MDF processing.

RX30 ISO grade K20, ultra-fine grain, the first choice for processing hardwood strips, suitable for making all kinds of indexable inserts, forming inserts and planers for roughing and general machining of softwood and hardwood, etc., can also be used for machining Medium and high density plate, cast iron, non-ferrous metal and non-ferrous metal processing, special grade for spiral milling cutter.

SK40S ISO grade K20 has ultra-high wear resistance, anti-bonding ability and thermal strength, suitable for processing high temperature alloys, stainless steel, high manganese steel and other materials.

AB10 ISO grade K20, with good wear resistance and strength, high cutting speed and small tool diameter. Suitable for processing wood, plywood and slatted fibreboard.

RX9.5 IS0 grade K05, with good wear resistance and strength, used to cut plastic and metal sheets, etc., good welding performance, good sharpness, widely used in pelletizer hob.

YG15 has high cobalt content and good toughness. It is suitable for long paper cutting knives with long welding surfaces. It has largely replaced high-speed steel for film cutting and textile cutting.

YG15X is a fine-grained alloy, which improves the hardness on the basis of YG15. It is suitable for products with high life expectancy and has good weldability.

Thin and narrow strips display

Punch wide and narrow strips

Non-magnetic products production process

Equipment Exhibition

Testing Equipment