Various sizes customized processing Full Carbon Fiber Tube and Plate Glued Parts.

Introduction

This company specialized production, customized: all kinds of carbon fiber medical bed board, carbon fiber

tubes, Carbon Fiber Tube sheet, all kinds of carbon fiber molding, vacuum forming products.Can according to

the requirements of customers design, development, production.Products are widely applied to

aerospace, military industry, style, medicine, machinery, electronics, construction, etc.
1. thickness: 0.5 mm, 0.8 mm, 1.0 mm, 1.2 mm, 1.5 mm, 2.0 mm, 3.0 mm, 3.5 mm, 4.0 mm, etc.;
2. color: black, silver, etc., according to the international color card number color;
3. regular pattern: 1 k, 3 k, 6 k...Plain/Twill;
4. surface smooth, clear texture, high strength, light weight, corrosion resistance.
This product features:
This product USES the Carbon Fiber Tube as raw materials;
This product is tensile, compressive performance;
This product has excellent corrosion resistance;
This product is waterproof properties;
This product is fireproof performance, Carbon Fiber Tube for high temperature above 130-250 degrees in the fire,

so this product for the average case of flame has strong protection ability;
The product high strength, strength is equal thickness steel 6 times.

Specification

The three major advantages

The advantage of hardness and strength:
Tensile strength, tensile strength of carbon fiber, which is about 10 times of steel.
Stability, high fatigue strength: carbon fiber structure made of composite material, after stress fatigue

millions of times of cycling test, its strength retention rate is 60%, and steel is 40%, aluminium is 30%, the

glass fiber reinforced plastic has only 20% to 25% so design products from the safety coefficient, carbon

fiber composite material to a minimum.
Elastic modulus, carbon fiber composite materials tensile elastic modulus is higher than steel, but the

aramid fiber and glass fiber composite materials tensile elastic modulus is only half of the steel and a

quarter.
Fatigue strength, fatigue strength of carbon fiber and aramid fiber composites is higher than Gao

Jianggang silk.Metal materials under the action of alternating stress, the fatigue limit is only 30% ~ 40% of

the static load strength.Complex or because the fiber and matrix can be moderate crack extension, the

possibility of internal force redistribution and existing fiber composite materials fatigue limit is higher,

about 70% ~ 80% of the static load strength, and there are signs of deformation significantly before

destruction.
The advantage of the physical properties:
Weight: about one 5 of the steel.
Compared with the carbon fiber plate: carbon fiber sheet can stick on the surface structure of various

shapes, rules of sheet and more suitable for the component surface.In addition, due to the paste board

when the amount of the underlying resin than sheet material, thickness, and the concrete interface

bonding strength of the sheet.
Good thermal conductivity, the thermal conductivity of the inorganic and organic materials are usually

poor, but the thermal conductivity of the carbon fiber is close to the steel.Use of this advantage can be

used as a solar collector shell material of thermal conductivity of materials, heat evenly.

Display