The glass fiber winding tubes, winding pipe, glass fiber winding tubes Fiberglass Poles.

Introduction

Glass tube is made of glass fibre after dipping epoxy resin, the winding, curing, manufacturing can be

used in different solutions to winding glass fibers, to meet the requirements for different USES and

strength.Its USES include high voltage insulators, fuse tube, bush for high voltage electrical equipment,

railway bushing, and high pressure bottle, etc.Other names: ring oxygen glass fiber winding tubes,

winding pipe, epoxy tubes, glass fiber winding tubes, glass tube, the fuse tube, bush for high voltage

electrical equipment, high pressure bottle epoxy winding pipe.

Main features

Raw materials and their applications: glass fiber than organic fiber, high temperature resistant

non-combustible, corrosion resistance, good heat insulation, sound insulation, high tensile strength,

good electric insulation.But sex is crisp, poor wear resistance.Used to make reinforced plastic (see image)

or enhance rubber, glass fiber as reinforcing material has the following characteristics, these

characteristics make the use of the glass fiber is far more than other types of fibers widely, the

development speed also leads the characteristics listed below:

1) High tensile strength, elongation is small (3%).

2 ) High elasticity coefficient, excellent rigidity.
3) Within the elastic limit of large amount of elongation and tensile strength is high, therefore, absorb

the impact energy.
4) For inorganic fiber, incombustible, good chemical resistance.

Specification

Test standard

Glass fiber high tensile strength, elongation small (3%), the test method standard: GB/T14338-1993

synthetic staple crimp test method of GB/T 15232-1994 textile glass fiber mat on the determination of

tensile breaking strength, 7689.5 GB/glass fiber is the determination of tensile breaking strength and

breaking elongation, GB T15232-1994 textile glass fiber mat on the determination of tensile breaking

strength, GB/T 7689.5 2001 | woven fabric reinforced material test method for part 5: determination of the

glass fiber tensile breaking strength and breaking elongation, and so on.Single fiber strength and

performance test will be adopted to test glass fiber with high strength and high modulus fibers strength

meter.

Display