Epoxy Resin Matrix UV Resistant Carbon Fiber Panel - Corrosion Resistance Twill Weave Carbon Fiber Plate

Carbon fiber panels offer a combination of strength, rigidity, and lightweight properties that make them an excellent choice for various engineering and design applications. When selecting a carbon fiber panel for a specific project, it's important to consider the required dimensions, thickness, and other design considerations to ensure it meets the intended performance and structural requirements

.

Carbon fiber plate is manufactured using 100% carbon fiber reinforcement and epoxy resin matrix, cured under pressure at elevated temperature to produce a carbon fiber sheet with engineering-grade mechanical properties and a class-A surface finish.

The plate has the classic 2/2 twill, 3k woven carbon fiber appearance with a pin-hole-free high gloss finish. The reverse of the sheet features an even textured 'peel ply' finish suitable for secondary bonding.

3K carbon fiber: The most popular, most common carbon fiber. It gives the plate a classic carbon fiber look. 3K is the workhorse of carbon fiber.

It's light, relatively stiff, and easy to get and make. 3K got higher elongation before failure and ultimate strength than 6K, 9K, or 12K. Because 3K is a smaller bundle of fibers, the thinner fabric can be woven than with 12k, or thinner tubing can be filament wound, but if the fiber is the same grade, stiffness, and strength are not affected by tow size. It is used in Aviation, industrial fields, architecture, sporting, and recreation goods.

Carbon Fiber Plate Features:

1. 100% 3K Carbon Fiber Strong Strength and Light Weight.
2. Perfect for any application including RC, drones, helicopters, etc.
3. The surface is cross-grain, the matte surface without any glass fiber contents.
4. These carbon fiber sheets contain 100% carbon fiber imported from Japan.
5. It is especially applicable for Multicopter, Helicopter, and RC airplanes.

Carbon Fiber Plate Typical Uses:

• General Engineering
• Robotics
• Aerospace
• Motorsport
• X-Ray/Metrology Equipment
• R/C Models

Plain Carbon Fiber Plate Advantages:

• Good flatness (minimal taper or warp)

• High gloss finish on both sides

• Pin-hole free surface finish

Carbon Fiber Plate Specification:

How to Cut and Shape?

This carbon fibre sheet can easily be cut and finished to a high standard using simple workshop tools. Cutting and finishing carbon fibre can also be perfectly safe if you follow some basic safety precautions.

Manufacturing Contracts

If you are an established manufacturing business looking for a reliable supplier of engineering quality carbon fibre sheet please call us to discuss your requirements or arrange to see some samples.