Qualified Engine Carbon Cleaner Products Car Carbon Cleaning Machine With CE Approved
When needs to clean carbon:
1. When the engine idle speed is unstable, Engine jitter, and Oil spill.
2. When you feel the engine power decreased and bad acceleration.
3. When Cold start is difficult, surge, noise increases, exhaust emissions exceed the standard.
4. When the driving mileage reached 50,000 kilometers.
Technical data:
Model Number | HO-1500 |
Voltage | AC 110V~380V single phase |
Frequency | 50/60HZ |
Rated Power | <6KW |
Gas Output | 1500L/h ±10% |
Working Pressure | ≤0.2 Mpa |
Weight | 120kg |
Size | 600*600*1100mm |
Package Dimension | 600*650*1250mm |
Ambient temperature range | 5°C~50°C |
Introduction:
The hydrogen-oxygen carbon removal machine is a machine that utilizes the catalytic characteristics of the hydrogen-oxygen gas, the combustion-supporting characteristics, the high-temperature characteristics of the hydrogen-oxygen flame, and the characteristics of the hydrogen-oxygen flame-generating water to remove the volumetric carbon inside the automobile engine. In fact, it is a hydrogen-oxygen generator and some accessories.
Catalytic principle:
Gasoline is a heavy molecular chain hydrocarbon with many carbon-hydrogen bonds. The intermediate product produced by the combustion process is CO. According to theoretical analysis and experimental detection, CO is in the case of pure air, even at a temperature of 700 °C. The burning is also incomplete. However, after the introduction of hydrogen and oxygen molecules and hydrogen and oxygen radicals, the combustion is significantly accelerated. At the same time, because the temperature of the oxy-hydrogen flame is as high as 2800 degrees, any flame retardant carbide will gradually burn out.