Smart Injector Tester And Cleaner Injector Cleaner Machine With Small Size
Introduction
The operation of the injectors plays a fundamental role in the power of each engine. Due to poor fuel, the injector does not work well, causing serious carbon accumulation in the cylinder; the cylinder and piston ring accelerate wear, resulting in unstable idle speed, increased fuel consumption, accelerated acceleration, difficulty in starting and excessive discharge, and severely blocked the spray. The nozzle is damaged by the engine. Therefore, it is necessary to clean the injector regularly, and if it is not cleaned for a long time or the nozzle is frequently cleaned, it will have a bad influence.
Parameters
Model Number | FIC-601 |
Voltage | AC 220V±10% |
Frequency | 50/60Hz |
Relative humidity | <85% |
Net Weight | 27kg |
Ambient temperature range | -10°C~40°C |
Size | 40*41*58cm |
Cleaning&testing sequences
A complete cleaning and testing sequence shown below should be followed:
1. Ultrasonic cleaning;
2. Uniformity/Sprayability test;
3. Leakage test;
4. Injecting flow test;
5. Automatic test.
Select the corresponding parameter and set up according for various tests. For detailed operations, please refer to “0peration” part.
Advantage
Ultrasonic strong cleaning technology, strong cleaning ability. The penetration and cavitation shock waves caused by the passage of ultrasonic waves through the medium provide strong cleaning of objects with complex shapes, cavities and pores, which can remove stubborn carbon deposits from the injector.