Function
1. Effectively solve the time-consuming and laborious phenomenon of manual replacement of antifreeze
2. Effectively improve the cooling system and the working environment of the engine
3. Pressure leak detection function, check for leaks by increasing pressure
4. New and old oil window, new oil injection and recovery of old oil at a glance, can accurately control the degree to prevent mixing of old and new oil
Parameter
Working environment:
Ambient temperature: -10 to +40 °C
Relative humidity: <85%
Technical indicators:
Voltage: DC12V
Working pressure: >0.5MPa
Maximum power: 150W
Pressure gauge: 0-1.6 MPa
Vacuum gauge: -0.1-0Mpa
Noise: <75db
The importance of antifreeze
The main components of antifreeze are water and ethylene glycol. Its effect is not only cooling, but also antifreeze, rust, corrosion and lubrication. The shelf life of a typical antifreeze is two years. After long-term use, the internal components may change greatly and no longer have the original function. Then you should take timely measures to replace the antifreeze.
Usage Step
Step 1 | Before the replacement, the engine needs to be warmed up for ten minutes to increase the engine water temperature to form a large cycle |
Step 2 | First disassemble the car engine water tank connection pipe and install the appropriate connector. Connect the connector on the machine to the tank |
Step 3 | According to the size of the engine, add a proper amount of new coolant to the machine inlet |
Step 4 | Adjust the control panel to the filling function |