Carbon Clean Solutions Hydrogen Carbon cleaning Machine Decarbonising Diesel Engine

What’s the HHO machine?

The automobile hydrogen-oxygen carbon removal machine adopts the Brown principle to extract hydrogen and oxygen atoms in water by electrolysis to form a hydrogen-oxygen mixed gas flow, which is input into the engine combustion chamber via the engine intake manifold. After the Brown gas fills the engine combustion chamber, the ignition is ignited. During the period, the carbon will be melted by the high temperature up to about 125℃～6000℃. The substance after combustion cannot exhaust the whole at once time, it will be exhausted by the daily driving after finishing the carbon cleaning.

How does it work?

Using water as raw material, electricity is decomposed into Hydrogen and Oxygen by electricity. Hydrogen is used as raw material, Oxygen is used for combustion. And it is sent into the interior of the automobile engine through the air inlet and mixed with gasoline and air.

The details:

How to use it?

1. Turn on the power and select the car displacement and operating modes( suggest the negative mode).

2. Insert the gas outlet pipe of the machine into the car engine intake manifold (air filter or brake vacuum tube).

3. Start the vehicle and keep idling

4. Setting the time of cleaning carbon(up to types of vehicles, usually 20 min),then click the start button on the control panel.

5. When hearing the buzzing sound, the machine finished engine carbon cleaning.

6. Turn off the power of the machine, then turn off the vehicle, pull out the gas outlet pipe in the end.

7. Restore the car line.

8. Start the car, step on the throttle at a constant speed until the speed is at 3000-3500 rpm and then release it,and do it again after 3 seconds. This was repeated 6 times. Until the moisture and dirt in the exhaust pipe are discharged, the carbon removal is finished.