Carbon Clean Diesel Engine Hydrogen Carbon Cleaning Machine With 4.5 KW Power Supply

The solution of reducing the exhaust emission:

The best solution is engine carbon cleaning.

When there are some carbon deposits increased in the car engine, especially in the three way catalytic converter, the harmful and other substance cannot be filtered and exhausted directly. Therefore, during the daily, we can usually see the white, black and blue exhaust emission, which shows that there is something wrong in the engine system. If the car owner don’t solve this problem, then the exhaust emission of their cars will not meet the requirement of air standard.

What is carbon cleaning service?

1. Traditional method of cleaning carbon:

Dismantle engine parts, and then take use of the chemical cleaning agent to clean every parts of engines. This way can clean the carbon deposit thoroughly, but it will do harm to human’ s healthy and damage engines.

2. HHO technology carbon cleaning method. It is no need to dismantle engine parts, just connect the intake manifold and put the mixture of Oxygen and Hydrogen in to the engine system and combust with the carbon deposit. The carbon will be melted and exhaust with the steam generated by the Oxygen and Hydrogen through exhaust pipes.

Product specification:

How to use it?

• Turn on the power and select the car displacement and operating mode.
• Insert the gas outlet pipe of the machine into the car engine intake manifold (air filter or brake vacuum tube).
• Start the vehicle and keep idling
• Setting the time of cleaning carbon(up to types of vehicles, usually 20 min),then click the start button on the control panel.
• When hearing the buzzing sound, the machine finished engine carbon cleaning.
• Turn off the power of the machine, then turn off the vehicle, pull out the gas outlet pipe in the end.
• Restore the car line.
• Start the car, step on the throttle at a constant speed until the speed is at 3000-3500 rpm and then release it,and do it again after 3 seconds. This was repeated 6 times. Until the moisture and dirt in the exhaust pipe are discharged, the carbon removal is finished.

​