HHO Best Intake Valve Cleaner Hydrogen Carbon Cleaning Machine For Fuel System

Product Specification:

1. Model: HO-1500

2. Working Medium: Deionized water+electrolyte

3. Working Temperature: -5°C~50°C

4. Water Consumption: 0.7L/h

5. Rated Power: 4.5KW

6. Input Voltage: AC 110~380V

7. Frequency: 50 / 60 Hz

8. Gas Output: 1500±10%

9. Time: 20min

10. Material: AL

11. Net Weight: 120KG

12. Gross Weight: 160KG

13. Size:600*600*1100mm

14. Package: Wooden carton

15. Packing Dimension: 600*650*1250mm

Product Introduction:

The product HO-1500 car carbon cleaning machine can generate the mixture gas of Hydrogen and Oxygen which is also called Browns Gas. This special gas was first invented by a professor named Yull Brown in Australia. And in 1990 he came to China for introducing his discovery and the technical person researched and developed the first Oxy-Hydrogen generator. After many years passed, this generator has been used in engine carbon cleaning, which is more safe and environment friendly than the other engine carbon cleaning machine before.

Product Feature:

• It is simple for the user to use it with HD touch screen and there is no need to dismantle the engine, so the whole process of carbon cleaning just needs 20 minutes.
• As there is an automatic negative pressure alarm device built-in and an emergency button that can one key stop on the machine, we guarantee 100% safety for using the machine.
• For there is no adding any chemical cleaning agent, it will do no harm to engines.
• After cleaning carbon, oil consumption, 70% of air pollution and engine noised can be reduced, and 20% of engine power improved.

Product Operation Steps:

• Turn on the power and select the car displacement and operating mode.
• Insert the gas outlet pipe of the machine into the car engine intake manifold (air filter or brake vacuum tube).
• Start the vehicle and keep idling
• Setting the time of cleaning carbon(up to types of vehicles, usually 20 min),then click the start button on the control panel.
• When hearing the buzzing sound, the machine finished engine carbon cleaning.
• Turn off the power of the machine, then turn off the vehicle, pull out the gas outlet pipe in the end.
• Restore the car line.
• Start the car, step on the throttle at a constant speed until the speed is at 3000-3500 rpm and then release it,and do it again after 3 seconds. This was repeated 6 times. Until the moisture and dirt in the exhaust pipe are discharged, the carbon removal is finished.