Engine Decarboniser Hydrogen Carbon Engine Cleaning HD Touch Screen
HHO Introduction:
The HO-1500 is an environmentally friendly product. The countries of the world today advocate environmental protection, especially in European countries. So the product will become mainstream in the future. Hydrogen and oxygen are produced by a chemical reaction of electrolyzed water while utilizing the physical properties of hydrogen and oxygen for carbon removal. It can remove the carbon deposit inside the car to the utmost extent. Moreover, the operation of the machine is very simple and can be done by one person.
Specification:
Model Number | HO-1500 |
Voltage | AC 110V/220V/230V/380V |
Frequency | 50/60HZ |
Rated Power | <6KW |
Gas Output | 1500L/h ±10% |
Working Pressure | ≤0.2 Mpa |
Weight | 120kg |
Size | 600*600*1100mm |
Differences between hho and other machines:
Hho carbon cleaner | Chemicals drip carbon cleaner | Water based foam detachable | Traditional dismantle engine | |
Carbon cleaning time | 20 minutes | 40 minutes | 40 minutes | About 2 to 4 hours |
Environmental protection | Complete combustion, non-toxic and harmless exhaust | Toxic and harmful exhaust | Not easy to handle waste | Carbon particles, not easy to handle waste |
Advantages and disadvantages | The engine can be idling | The engine is running at idle speed, and the medicament is continuously inhaled | The implementation process is cumbersome and the carbon is incomplete | Time wasting, destroying the original assembly, cleaning intuitive |
Cost | Carbon cleaning process | Chemicals drip, engine oil, oil filters | Chemicals foam, engine oil, oil filters | Time of engine dismantling, chemical drip, engine oil, oil filters |
precautions
1. The working medium used in this machine is carbon removal liquid and electricity. The power supply is 220V AC, except for the carbon liquid to protect and extend the service life of the equipment, please cherish your equipment.
2. In addition to the corrosive nature of the carbon solution, do not stick to clothing and skin, should be rinsed with water in time.
3. Periodically discharge the condensate tank drain pipe, the draining should be carried out in the state where the equipment is completely cooled. The draining should be carried out once every ten times of removing the carbon. After the draining is completed, the draining valve is closed;