PVC Coated Overlay with Strong Adhesion Glue Coating for HP indigo digital printing - Card Body Lamination
PVC Coated Overlay Film for HP indigo printing with Strong Adhesion
Specific to the new coated overlay of HP Indigo electronic ink, suitable for all series of HP Indigo digital printer, it has high peel strength with electronic ink, small lamination discoloration, not easy to cause deformation, and wide application.
1. PVC Strong Coated Overlay Film - Description |
PVC Coated Overlay MCO-W model is suitable for laminating with most PVC sheets printed by various printers . It features high adhesion , no color change and deformation .
It is applicable to almost all sheets printed by various ink . It features excellent peeling strength and long aging time .
1.Thickness Range: 0.04-0.1MM
2.Finish: Matt with glue on one side
3.Size: Customized Roll size or Sheet size,A4 , A3 or as per customer requirements
4.Charastics:High initial stick
5.Color : transparent with one-side glue coating
6.Package method : by reel or 500 sheets per bag / 4-8 bags per paper carton , or as per customer requirements
7. Storage condition: Sealed , moisture-proof , room temperature under 40℃ , Keep it horizontally, avoid heavy pressing and direct sunlight .
2. PVC Strong Coated Overlay Film - Specification |
Item | Parameters |
Vicat softening point | 72±2 ℃ |
Heating Shrinkage ratio | ≤ 10 % |
Tensile Strength | ≥ 40 MPa |
Normal thickness in mm | 0.04 , 0.05,0.06,0.08,0.10 |
Peel Strength (90°, 300mm/min) | ≥ 6.0 N/cm |
Aging time (65℃ temp./95% humidity ) | >200 hours |
Suitable ink | offset and silk screen printing UV ink, Pigment and dye ink for inkjet printing as well as digital printing ink |
3. PVC Strong Coated Overlay Film - Applications |
Manufacture Method:
1. Put printing core and two overlay together, then put into the laminator, the temperature is determined as per the instruction of the machine , Pls be noticed that all glue sides of both pvc sheets and overlay are put inward.
2. The lamination usually lasts 10-15minutes ,The pressure is 6-8Mpa, The temperature is 120-140°C
3. Cut the card
4. PVC Strong Coated Overlay Film - Inspection , Package and Storage |