Rough Silk pattern laminated steel plates MSP-S-R used for INLAY (Prelam) sheet lamination

1.Rough Silk pattern laminated steel plates MSP-S-R used for INLAY (Prelam) sheet lamination- Introduction

Rough Silk Finish Lamination Steel Plates MSP-S-R have heavy silk finish surfaces on both sides and are designed for laminating plastic card sheets or RFID card Prelam (INLAY) sheets in the cad laminator. It can ensure perfect plastic card surface finish after lamination. Our plates are being widely used by many card factories in both China and foreign countries worldwide.

Plate size(L×W): A4, A3 or custom-made size

Plate thickness: 1.0 mm (Thickness tolerance: ±0.05mm)

Dimension tolerance: ±1mm for length and width.

Plate flatness level: maximum 1 mm.m

Surface pattern: Fine silk/Rough silk

Surface hardness: HRC80±20

Thermal transmission: 0.04cal/℃.cm.sec at 20℃

Packaging box: solid plywood carton with soft cushion protection inside.

2.Rough Silk pattern laminated steel plates MSP-S-R used for INLAY (Prelam) sheet lamination- Parameters

Technical Parameters:

3.Rough Silk pattern laminated steel plates MSP-S-R used for INLAY (Prelam) sheet lamination-Features

Key Features:

1). The two sides are covered with protection foils (blue thin films) to ensure good protection on both surfaces. There is no glue left after the foil is removed before the plate is used at the first time.

2). Two sides have the silk pattern in the same quality.

3). There are no scratches, dents, stripes shadows and dust on plate surfaces.

4). The edges are smooth and deburred with the round curved corners.

5). After lamination, the plates are not sticking to the laminated plastic sheets.

4.Rough Silk pattern laminated steel plates MSP-S-R used for INLAY (Prelam) sheet lamination-Packing