0.06-0.1mm Thick High Adhesive PVC Hologram Coated Overlay Laserable For Smart Card Production

(Hologram overlay for PVC card, Star Shaped Laser Film, PVC Laser Film, Snowflake shape laminating film, Laser hologram PVC film)

1. Introduction of 0.06-0.1mm Thick High Adhesive PVC Hologram Coated Overlay Laserable For Smart Card Production

It is also known as laminating film, the main ingredient is polyvinyl chloride, it is on the surface of PVC film coated with a layer of thermosol, so that it and PVC card printing sheet or basic PVC material has a good adhesion effect. The main function of the tape film is to cover the upper and lower layers of the PVC card.

After the heating and pressure of the laminating machine, the PVC card can form a very bright and clean surface, and can play a very good protective effect on the printing content, effectively prevent the card surface from being scraped and scratched.

2. Characters of 0.06-0.1mm Thick High Adhesive PVC Hologram Coated Overlay Laserable For Smart Card Production​

PVC laser aluminized film: mainly used in screen printing, offset printing, gravure printing and other packaging products.

It is suitable for high-end membership CARDS, VIP CARDS, platinum CARDS, diamond CARDS and can be made into IC CARDS, ID CARDS according to the requirements.

3. Application of 0.06-0.1mm Thick High Adhesive PVC Hologram Coated Overlay Laserable For Smart Card Production​

It is suitable for high-end membership CARDS, VIP CARDS, platinum CARDS, diamond CARDS and can be made into IC CARDS, ID CARDS according to the requirements.

4. Parameters of 0.06-0.1mm Thick High Adhesive PVC Hologram Coated Overlay Laserable For Smart Card Production​

Material: PVC

Color :Transparent

Thickness:0.06mm 0.08mm,0.1mm

Width:210mm or custom

Length:297mm or custom

Surface: smooth

Gloss 60°%:≤50

Roughness (Ra um):0.7-1.3

Roughness (RZD um):4-7

Density (g/cm³):1.25±0.05

Black spots: Particle size above 0.5mm is not allowed

Impurities: Particle size 0.3-0.5mm no more than 20

Tensile Strength vertical Mpa:≥50

Tensile Strength horizontal Mpa:≥44

Vicat softening point ℃:≥72±2

Heat shrinkage:≤45

Specification:210*297mm( special size can be customized)

Thickness in mm: kinds of thickness like normal Pvc overlay , such as 0.06,0.08,0.1mm