Used Corrugated Box Careboard Production Line Providing Overseas Installation Services

Electric Mill Roll Stand

1,Symmetrical structure, which can be installed at the same time two bundle of paper tube; The use of electric drive to complete base paper clamping, lifting, loosen, moving in and around translational action.

2,working width:1600mm.

3,Maximum reel paper:1400x1600mm.

4,Minimum reel paper::400x800mm.

Maximum bearing of single side:2000kg.

6,Penumatic brake set

7 .ectrical components are centralized control, button action.

8, travel switch control range.

9, friction slices pre-tightening force control lifting weight.

10.One main motor, power 2.2 kw, each arm power 1.5 kw×4

Absorb Single Facer

1.It adopts cover-type structure, with high pressure blower and suction silencer device.Air supply and the electrical cabinet focused on the same operation from hosts not less than 1.5 m.

2.Frame and panel wall with cast iron structure, wall thickness of 130mm.Main drive with built-in oil filled gearbox transmission.

3. Corrugated roller made of 48CrMo alloy steel, quenched and tempered, medium-frequency quenching, surface grinding, Corrugating roller diameter DIA 268mm of surface hardness HRC58 or more (service life not less than Locke millions running metres, corrugated roller finished wall thickness of about 55mm, repairs twice) critical parts such as rollers, pressure rollers wafangdian bearing high temperature bearings.

4.Pressure roller DIA 270mm, surface grinding and chrome-plating process, the cylinder control pressure, material for carbon steel, 45th, quenching and tempering (with device).(Finished wall thickness of about 55mm)

5.Gluing wall plate armed structure, pneumatic controls, glue roller 25 line pits dot the surface processing ,after the hard chromium plating process, squeegee roller surface hard chromium plating grinding.

6.Corrugating roller, pressure roller and raw materials provided by the Zhongyuan special steel, corrugated rolls for 0.10 , high pressure roller for 0.075.being with the positioning device

7.Clamping cylinder adopts 160mm

8.pre-heating roller adopts two bars of seamless steel pipe named as 240mm and 270mm, which is originated from Tian Gang .

Conveyor bridge

1.this part is connected with 20#channel iron , 16#beam,63#angle steel total length is 10 meter

2.attached paper hanger , and Synchronously running with the corrugated machine

3.attached with security Barricade for 1 set(1 inch tube) , ladder for 1 set(made of 1 inch welded tube,width for 600mm)

4.Electric correction, it will be glutted when it gets adsorption

5.That Spreading 12 PCT on conveyor bridge plate, thickness of 10MM

6.Double preheating and gluing the bridge sidewalks , make it connected .

Dual pre-heating device

1.Heating roller 2 - ¢ 600mm, and adopts Q235B container board .

2.Heating roller electric switch point, adjust the range between 60-270 degree.

3.It is processed with scrubbing eletro-plating,which is smooth and durable

4.all of the thickness of the pre-heating roll reaches at12mm or more .