Speedy Magnetic Card Data Encoder 3 tracks Encoding CR80 Magnetic Card Data Writer YME-1​

1. Introduction of Speedy Magnetic Card Data Encoder 3 tracks Encoding CR80 Magnetic Card Data Writer YME-1

Speedy Magnetic Card Encoder YME-1 is designed to encode the magnetic stripe cards in a speedy and reliable way. It can encode 3 tracks at the same time with the maximum speed of nearly 10000 cards per hour. The magnetic writing unit mechanism is highly optimized to ensure the even speed of encoding and maximize the magnetic writing success rate. The encoder YME-1 is designed to encode almost all type of magnetic card, but it is not designed for encoding financial bank magnetic cards due to the technical limit.

2. Basic configuration of Speedy Magnetic Card Data Encoder 3 tracks Encoding CR80 Magnetic Card Data Writer YME-1

Card feeding magazine-Card writing/reading unit-card rejection box-Good card collection unit

1. Speed: 8000-10000 cards/hour

2. Operating Program: Reliable AIO control software system for magnetic stripe data encoding.

3. Magnetic Record Density: 210 BPI for track 1; 75 or 210 BPI for track 2; and 210 BPI for track3

4. Applicable Magnetic tripe: HiCo/LoCo, 300 oe-4000 oe, 3 tracks, 12.7mm wide

5. Applicable Card type: Standard magnetic stripe card

Card thickness: 0.5mm-0.8mm

Card length: 85.47mm-85.72mm

Card width: 54.03mm-53.92mm

3.Technical Parameter of Speedy Magnetic Card Data Encoder 3 tracks Encoding CR80 Magnetic Card Data Writer YME-1

4.Other information of Speedy Magnetic Card Data Encoder 3 tracks Encoding CR80 Magnetic Card Data Writer YME-1

Our service :
Pre-sale
(1) Professional suggestions (raw material matching, machine selection, the condition of building factory, feasibility analysis for brick machine production line)
(2) Device model choice (recommend the best machine according to the raw material, capacity and the size of brick)
(3) Efficient on-line service
(4) Welcome to visit our factory and production line any time, if you need, we can make invitation letter for you.
(5) Introduce the company file, product categories and production process.
Sale:
(1) Update the production scheduling in time
(2) Quality supervision
(3) Product acceptance
(4) Shipping on time
After-sale:
(1) The engineer will guide to carry out the plant at the clients side if needed.
(2) Set up, fix, and operate
(3) offer training to the operator until they are satisfied at clients side.
(4) Skill support the whole using life.
(5) Recall clients regularly ,get feedback in time ,keep well communication with each other

Guarantee
(1)We can supply one year guarantee period for our card machines, if the client have any question ,they could contact our service department any time ,we will supply efficient service .
(2)Within one year ,if the client meet the unsolvable questions ,we can make site supporting.