RFID Inlay Sheet Chip Antenna Welding Machine Manual Card Chip Welder YCR-1
Manual Chip Re-bonding Machine/ Chip Antenna Welding Machine/ Manual Card Chip Welder YCR-1
1. Machine Introduction of RFID Inlay Sheet Chip Antenna Welding Machine Manual Card Chip Welder YCR-1
This machine is designed for manually bonding the copper wire onto the contactless chip. The amplifier and display is equipped to ensure precise and quality bonding result. It is necessary equipment in the process of contactless Card INLAY sheet or RFID card Inlay sheet production.
2. Features of RFID Inlay Sheet Chip Antenna Welding Machine Manual Card Chip Welder YCR-1
As an indispensable machine of RFID card Inlay or Prelam sheet production line, the Manual Chip Re-bonding Machine YCR-1 is also known as named as RFID Card INLAY Sheet Chip Antenna Welding Machine, Manual Chip Bonding Machine or Manual RFID Card Chip Welder YCR-1.
Speed | 800-1200 cards per hour. |
Dimension | L500×W400×H500mm |
Weight | 60kgs |
Power Supply | AC220V 50/60HZ |
3. Technical Parameter of RFID Inlay Sheet Chip Antenna Welding Machine Manual Card Chip Welder YCR-1
4.Application of RFID Inlay Sheet Chip Antenna Welding Machine Manual Card Chip Welder YCR-1
Re-bond the bad unit (if bonding failure) as per the checking result in step 9, and test again after rebonding. If still not good, mark it with marker pen.
Machine model needed: Manual Chip Re-bonding Machine YCR-1
Machine quantity needed: 1 set