Prelam Sheet Hole Puncher for 3x8 RFID Card Inlay Sheet Production YHP-A

1. Introduction of Prelam Sheet Hole Puncher for 3x8 RFID Card Inlay Sheet Production YHP-A

Contactless Card INLAY Sheet Hole Puncher YHP-A is designed to punch chip fixing holes for installing built-in module in the process of contactless card INLAY sheet production. The position of chip fixing holes are adjustable in a certain range by adjusting each punching mould positions. It has two sets of punching moulds, one is for standard big chip (COB chips, MOA2, MOA4), and another is for smaller chip (MOA8 chips).

This hole punching machine uses to punch of the positioning hole and the clearance hole on PVC, PETG and ABS sheets with different thickness and size for contactless cards (RF cards). Control by the servo system and use the precision mold to punch, which ensure the quality of the products and improve productivity, only need one operator.

In the machine structure, the machine is easy to operate and maintain, which enhances the service life of machine and productivity.

2. Features of Prelam Sheet Hole Puncher for 3x8 RFID Card Inlay Sheet Production YHP-A

As an indispensable machine of RFID card Inlay sheet production line, it is also known or named as RFID Card INLAY Sheet Hole Puncher, Automatic Prelam Sheet Hole Puncher or RFID Card Inlay Sheet Chip Hole Die Cutter YHP-A.

3. More details of Prelam Sheet Hole Puncher for 3x8 RFID Card Inlay Sheet Production YHP-A

1. Punch the hole for the chip of the inlay, which ensures the modules and the PVC embedding on the same plane and protects the chips.

2. The machine has two molds with two different sides, it can be used for different production technology, just press the switch to select the mold.

3. The pitch and the size of the punching mold can be adjusted according to the requirement.

4. The cylinder drives punching mold up and down with the low noise.

5. PLC control and can be punched different layout,

6. Use the precision mold to punch and ensure the quality of the products.

7. The life span of the mold is: It only needs to be whetted every two million times punching

8. Punching with the low noise.

9. Materials are loaded using the dowel pin, easy to adjust.

10. Use the servo system to position which ensure the position accurately

11. Use the PLC and the touch screen, stable and visualized.

12 .HMI system make communication easier.