DAT-930 PRO
Hardware features
Tablet Feature
1.10.1 inch three-proof industrial grade tablet,dust-proof, water-proof and shock-proof
2.Android operating system
3.Configure dual USB interface, dual data line interface, Network cable interface
TABLET PARAMETER
System | Base on Android 7.1 multi-tasking and multi-language operating system |
Dimension | 280*185*26.5mm |
Display | 10.1 "resolution: 800*1280/1200*1920 |
CPU speed | A72: 2GHz, A53: 1.4GHz |
RAM | 2GB compatible |
ROM Flash | 32GB |
Speaker | StereoBuilt-in 80/ 1W *2 speaker(waterproof) |
CPU type | RK3399 (ARM quad-core A53+dual-coreA72) |
Battery | Polymer lithium ion battery; 3.7V/10000mAh detachable; battery life:6+/H |
Touchscreen | Capacitive screen |
Docking | supports Docking extensions |
Connection | WIFI (802.11 ac/b/g/n) & Bluetooth 4.0 |
Camera | front and rear double shot, front 2MP / rear 5MP |
Interface | HDMI, USB3.0, USB2.0, TF card slot (expandable to 128G), headphone jack, DC interface, COM port |
VCI Feature
1.When communicating with the vehicle,the signal light flashes to offer good instructions
2.Data transmission is stable when Bluetooth or USB is connected
Intelligentautomotive industrial grade VCI communication module,supporting wide standards and vehicle manufacturer's protocols
3.Support all OBD K line, CANBUS, RS485, RS232 arbitrary pin combination,Compatible with all car communication protocols.
VCI PARAMETER
Product | DAT-930 PRO |
Processor | ARM 32-bit Cortex processor |
Input Voltage | DC 8-28V |
Operating Temperature | -10 to 70 °C (14-158°F), Relative Humidity:<90% |
Storage Temperature | -30 to 120 °C (-22-248°F), Relative Humidity:v90% |
Communication model | Bluetooth or USB
|
Protocols | UDS, ISO 9141-2, K/L lines, SAE-J1859VPW, SAE-J 1850PWM, CAN ISO 11898 ISO 15765-4, High speed, Middle speed low speed and Single wire CAN, SAE-J 1939, SAE-J 1708, SAE-J 1587 |
Product function
Diesel Version
Basic Function:Read ECU Info, Read DTCS, Erase DTCS, Clear learning value, Data Stream, Actuation Test, Read freeze frame data.
Special Function:Oil Reset, Broken cylinder test, DPF Manual Forced Regeneration, Injector Codes,Speed limit, High speed test, Idle speed comparison, Input/output control, Air bleeding, Level calibration, Idle speed learning, Key programmer, Camshaft timing control learning,Control unit adaptations, Read/Write VIN, Write vehicle parameters Modify electronic control data, Idle speed adjustment, ECU litigation, ECU Programming.
Gasoline Version
Basic Function:Read Version Information, Read DTC, Clear DTC, Data Stream, Actuation Test, Data Stream, Actuations, Read freeze frame data, etc.