Bottom loading hot and cold water dispenser with 2 taps or 3 taps ABS and steel housing YLRS-V3
Company Brief Introduction
Our company is a professional manufacturer of water dispenser, water purifier & parts. Our company integrates with designing, production and trading. With the principle of high start point, high standards, and supper quality, the company has sold its product and been well-known in domestic and oversea market.
Competitive advantages of our company.
1. We have been in the field of compressor cooling for more than 10 years.
2. We provide competitive prices and high quality products, and fast delivery
3. Guarantee 100% detection of all products
4. Good after-sales service.
5. Our products have been exported to Europe, Amazon, Middle East, Africa and other countries
Precautions
1. Use drinking water only.
2. Keep the condenser free from dirt and dust.
4. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
5. Children should be supervised to ensure that they do not play with the appliance.
6. Do not make any changes or damage to the cooling system. Any changes or maintenance to the cooling system should be done by qualified organization.
6. Do not tilt the dispenser more than 45 degrees or you may damage the compressor.
7. The unit is equipped with a grounded plug. Do not alter or change the plug in any way.
8. Never turn on heating switch when there is no water.
9. Hot water is hot enough to cause injuries. Please keep your children away from the hot water faucet.
10. Please turn off the power switch when stopping using it.
Description of our products
1) standing NEW model, elegant, innovative
2) Cooling system: compressor cooling
3) Cabinet for storing 5 gallon bottles
4) Housing material: ABS& cold rolled steel
5) Available with white or silver colour
6) Left tap for hot water, right tap for cold water
7) Inner vessel made of stainless steel
8) Strong refrigeration, low noise and long service life
9) Manufactured using national food grade materials
Specifications:
1) Rated voltage: 220 - 240V / 110-127V
2) Rated frequency: 50Hz / 60Hz
3) Input heating power: 550W
4) Input cooling power: 85W
5) Hot water-making capacity: 85-95°C, 5L/h
6) Cold water-making capacity: 6-10°C, 2L/h
7) Refrigerant: R134a
Precautions
1. Use drinking water only.
2. Keep the condenser free from dirt and dust.
4. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
5. Children should be supervised to ensure that they do not play with the appliance.
6. Do not make any changes or damage to the cooling system. Any changes or maintenance to the cooling system should be done by qualified organization.
6. Do not tilt the dispenser more than 45 degrees or you may damage the compressor.
7. The unit is equipped with a grounded plug. Do not alter or change the plug in any way.
8. Never turn on heating switch when there is no water.
9. Hot water is hot enough to cause injuries. Please keep your children away from the hot water faucet.
10. Please turn off the power switch when stopping using it.
Parameter table
MODEL NO. | YLRS-V3 |
Product Feature | Hot&Cold, Floor Standing Water Dispenser, Bottom loading bottles, without child-lock for hot water |
Product Specification | SUS 304 Tanks, Food grand silicon gel tubes |
Power Supply | AC 220-240V/50-60HZ |
Water level control | Good quality float to control the water level inside cold tank |
Pump | Good quality for the pump, to work when the water fills into the cold tank |
Power Consumption | Cold: 90W, Hot: 550W |
Cooling System | Compressor cooling |
Refrigerant | R134A |
Temperature Range | 6-10℃ |
Temperature Control | Thermostat(6") |
Volume of Tank | 3.2L |
Heater Type | Inner Heater |
Tank Type | Weld Tank |
Temp Range | 85-95℃ |
Temp Control | Bimetal Thermostat |
Volume of Tank | 1 Liter |
Colours Available | White&Black decoration |
Product Weight | 14KGS |
Product Boxed Weight | 15KGS |
Product Dimensions | 36X33X102CM |
Product Boxed Dimension | 39X36X105CM |
Loading Quantity | 456PCS/40HQ |
Hot water with child safety lock
Our Sample policy
We will charge the sample if you want to get a sample and check the quality before you place an official order.
And the freight by Fedex or DHL is on your side. We promise to minus the sample cost from the amount of your
official order in the near future. Thanks for your understanding.
How to Contact us