Quick Charger 3.0 Mini Power Bank 10800mah High Charing Speed Car Portable Jump Starter
Product Information | |||
MODEL | AL-JP22A | ||
Size | 164*84*27mm | ||
Capacity | 10800MAH | ||
Make for | car, mobile phone and laptop with type c support | ||
Accessories | 12v battery clamp ,type c USB cable, box,manual | ||
Technology Parameters | Output: QC 3.0, 5V/2A, 5V/2.1A,9V/1.5A,12V/1A | ||
Input: 5V/3A | |||
Starting current: 300A | |||
Peak Current: 500A | |||
Voltage :DC 12V | |||
Temperature: -20 degree -- 60 degree | |||
Cycle life: 1000 Times | |||
Battery core: lithium battery | |||
Function | Smaller and lighter portable power contrast with the congeneric products. patent technology | ||
Adopt 10800mAh high capacity high power polymer cells, support fast charging and low self-discharge, 1000times charging and discharging cycles. | |||
Support 12V car jump start;Power supply for mobile phone and laptops which support type C charging ; Can as a Light. |
Note:In order to carry it more convenience, it wasn't include the wall charger, but you can use other USB charger to charging it ! ! !
A must have for every car!
Make sure you and your loved ones can get home when stranded. It will jump start 3.5L gas or 2.5L diesel engine up to 20 times on a single charge. It is also a portable power bank with the lastest technology, with Qualcomm quick charge 3.0 and usb c / type-c input / output port.
Powerful LED Light
It has 3 modes LED light (high, strobe and SOS), It's an emergency life saver when you go camping, picnic, outdoor adventure or investigation.
MANUAL & ATTENTION:
1.Always connect the black clamp to the negative ( - ) terminal of the car battery first, then connect the red clamp to the positive ( + ) terminal of the car battery .
2.Do not touch the red and black cable clamps together or connect both cable clamps to the same piece of metal.
3.If the engine does not start immediately on the first try, disconnect the jumper cables from the car battery and wait at least 10 seconds before reconnecting the jumper cables to the car battery and attempting to start the engine again.
4.Once the engine has successfully started, disconnect the jumper cable clamps immediately.
5.Do not use jump starter to start vehicle if the number of battery indicators are less than 20% to protect the jump starter from damage.
6.Press the switch 3 seconds to start If you want to use LED for illumination and select the status (light, strobe, SOS, close) by pressing the switch to transform.
Package:
1 x jump starter
1 x USB cable for smart devices (Usb + type-c to micro usb + type-c)
1 x Exquisite packaging
1 x User manual