Car Trunk Opener 12v DC Electric Foot Trigger Car Trunk Automatically Release Kit
Main parts: the main host module and sensoring wires
1. This product was designed for the car models with original smart key PKE system. While the car is in locked state its trunk can not be opened. When you approach to the car with original remote control you can open the trunk directly without pressing any button on the remote control.
2. During installation, please test the related wires to be sure they are the correct ones ten connect them to the wires of the product.
3. Waterproof test had been done for the control module and the sensing wires. Please do not open the housing of the control module during installation.
4. During installation, please do not stick the control module and the sensing wire on the metal parts.
Note: please do not stick the sensing wires on or very near the metal parts. Please wipe clean the location for sticking the sensing wires before installation. At first please stick on both ends of the sensing wires. After testing and making sure the system works well then stick all the 3M stickers on the sensing wires.
1. The best installation location: The sensing wire 1 is not in the same axial surface as sensing wire 2 and there is a distance of 10-15cm between the 2 wires.
2. On certain car models there are too many metal parts on the bumper or when the sensing effect is not good, please install the sensing wires according to the above picture and also with a distance of 10-15cm between the 2 wires.