Automatic Reverse Braking System Dective Rear Obstacle Avoid Car Accident Useful Tool Auto Brake System

1.Usage

1, Hanging reverse gear, the system power on: LCD Monitor show “3KM” & image behind the car(if with monitor& camera),and buzzer “BI” one time ; rear obstacle distance(within 2m) can be displayed on monitor,and buzzer start beep in 1.5m. The car will be stop automatically when the obstacle distance is less than default braking distance .

2, When the car leaving default braking distance , you can continue back up until there is an obstacle less than default braking distance and brake server automatic working to stop the car again.

3, If you do not want the automatic reverse brake function, press the release switch to cancel it ,“3KM” disappeared on monitor , but still with display and sound to assist parking.

4, Change braking distance: open the host box, and find RED color swith,you can change the braking distance with following :

2. Installation

Before the installation operation, first check whether all the necessary tools available. Common tools generally include: hand drill, various screwdrivers, whiteboard pens, electrical tape , mobile power , tape measure, test pencil , multimeter, pliers , nylon cable ties, knife, wire, file, fine sandpaper, lighting, all kinds of hex wrench, adjustable wrench, socket wrench and other tools and materials.

Then check the vehicle structure to see if suitable for install sensors ,control unit ,brake server and wire routing;Read the instruction manual carefully, pay attention to installation issues and familiar feature uses functional description, check the product packaging,and determine the specific installation scenarios.

3.Component

The system include two major parts :

1).Automatic Braking system :include Brake server, metal fasten parts, release switch

2).Reverse Asssit system : include control unit, ultrasonic sensor,buzzer,Monitor,Rear View Camera and nessecary parts .