Universal Car Rear View camera Parking Assistance Camera Night Version Reverse Camera

Features

1. 100% brand new and high qulity.
2. Embedded mounting in rear bumper.
3. High sensitivity and low power consumption.
4. High-definition and 170 degree wide viewing angle.
5. Water-proof, shock-proof and anti-jamming functions.
6. Applicable to variety of vehicles: car, truck, RV, etc.
7. It helps to avoid incidents and accidents abrasion well.
8. This camera can give you a full sight of the back of your car when you are driving.
9. Low illumination level, it can work within 3 meters at night and other dark environments.
10. To protect your car from collision with invisible obstacle, choose a high definition and good quality camera as ours.

Install tips

1,Take out your stock license plate light at the back of your car.
2,Fix the camera to where the stock license plate light was.
3,Connect the built-in license plate light of the camera to where the stock license plate light was 4,connected to get the power
5,Connect the power of the camera to your reverse lights - red wire to positive and black wire to negative.
6,Connect the video cable of the camera to the extension cord.
7,Connect the extension cord to your car monitor.
8,You will see the images when your car is in reverse shift.

Design Purpose​

Most specific rear view cameras are installed by replacing a license lamp, either on the left or on the right, giving an off-center image on screen, which is frustrating and misleading. Our PRO series cameras provide an easy solution with a single button for image adjustment. Partial universal cameras have the same problem, so PJ-AUTO developed several universal models with this feature, too. Also the installer or user can select different parking lines according to the width of the vehicle, and switch the image horizontally or vertically according to the mounting. All operations can be done very easily by the button.