2 . The rollers are covered with high quality surface sand, advanced adhesives and technology, the adhesion modulus is above 0.85 in case of both dry and wet, the longevity is over 200000 times. Test precision is high, repetition performance is good, brake force errors <1.5% (National standard <3%).

3 . The reducer is manufactured by European technology, and the main parts of motor, bearing, sensor, etc. are all domestic famous brand products, which have passed ISO9001 international quality system certification and CE certification

4.The third roller can response and stop the motor automatically to avoid the wear of the tyre after the tyre locked during the testing

5.You can choose the tester with or without airbag lifting device.(The airbag lifting device is for the convenience of the vehicle entering and leaving the tester)

Configuration feature

Installation and connection

Take apart the box. Then take out all of the parts. Check the integrality of these products to see whether there is defectiveness or not. Then assemble them according following instruction.

1．Strictly perform construct groundsill supplied by Cartesy Diagnosis Technology Co., Ltd., when water table is high, please take prevent water leakage into consideration, make sure it is dryness in groundsill groove.

2. Pay attention to people and equipment when put the machine into groundsill by sling gently.

3. Use water level and adjust device to adjust the equipment’s level.

4. The company provides a rigorous construction of the base map. In areas where the groundwater level is high, consider the water leakage measures and keep the drying in the foundation tank. Pay attention to the pre-buried power supply, the signal cable and the gas pipeline.

5. Install the console and connect wire, equipment calibrate and adjustment. (calibrate finished when leave factory)

6. By the professional electrical personnel according to map laying cable, signal line to the middle of the base of the mechanical platform.

7. Open the cover plate and the middle cover, use the level to adjust the equipment level, so that the equipment rack plane and ground level and maintain the level.