Vehicle 3D Wheel Alignment Machine CT-DT121DT 3d Alignment Machine

Introduction:

1.Static measurement (fast track measurement) After installing targets, doesn’t need to push the car, static measurement, display measurement results directly after 3 seconds, fast and convenient. Be suitable for fast repair, check, smaller tyre, lift and working place is limited.

2.Two wheels measurement Operator install two targets on the front wheels only. This measurement way is fast, be suitable for new car without any accident.

3.Regular measurement (free push) Push the car backward first, and then push forward to the turntable position. During pushing procedure, pushing distance and pushing way can based on lift platform’s situation, doesn’t need to push to the specified position.

4.No limited by lift platform’s level situation Build vehicle body plane based on the centers connection of four rims, doesn’t affected by the level situation of lift platform.

5.Convenient and fast after-sale service It is very convenient to replace camera board, doesn’t need to re-calibrate.

6.Convenient and fast after-sale service Doesn’t need to do TID after replacing targets.

7.Doesn’t need TID TID will be generated by real-time calculating during push the car, operator doesn’t need to do TID after installation. Clamps and targets can be separate.

8.Short distance to push the car, easy and save time. Go back after pushing backwards 30 degree, easy pushing.

9.Internet cloud service Update database and wheel alignment software program automatically when internet access.

10.Test tool can inspect wheel alignment’s software and hardware at any time. When 3D wheel alignment appears fault, operator can run test tool program to inspect and find solution instructions from test tool.