1. Paper Feeding Unit:

♦ Can be set up continuous or skip feeding cardboard. (Have counter).

♦ Lead feeder increased suction flow rate, feed more smoothly and accurately. Frequency conversion adjusts vacuum and airflow, to fit the board size.

♦ Form feed roller have double glue, maintain inner lining soft

and rigid outer, flexibility and ensure that the surface wear-

resisting. Reduce the cardboard to be compressed.

♦ Dust removal device, seven dust removal device, brush, and fan can remove cardboard surface paper scrap, can be adjusted

according to the size of the cardboard section.

♦ Computer control to adjust feed roller clearance left and

right side baffle position.

♦ The rear paper holder is electrically controlled front and back to accelerate the setting speed.

♦ Host motor has a protection device (the machine without a solid lock, the host can't start running).

2. Printing unit:

♦ Scroll hanging version, lock device left and right sides, let hang version registration more accurately.

♦ The anilox roller includes a pneumatic clutch to keep same

speed to the host when the unit is printing. When the unit is not printed, the anilox roller can be stopped, reducing the

failure of the operation of the cots and roller damage, and

cleaning doesn’t have to keep the same speed with the host.

♦ Rubber roller and anilox roll don’t have fixed speed difference, making rubber roller scraping effect.

♦ Printing phase, computer, and electric digital control.

♦ Horizontal phase, computer and electric digital control, range ±10mm.

♦ Vacuum transfer roller, embossing roller, rubber roller, anilox

roll gap adjustment using a computer and digital electronic

control.

♦ Printing phase fixing device, electromagnetic clutch brake mechanism, when the unit separation adjusts phase or cleaning, the brake mechanism restricts gear rotation and maintains the fixed point of the original gear position.

♦ Automatic cleaning device for switching to ink and recycling more thoroughly.

♦ Automatic reset system after cleaning plate, scraper inking system.

3. Slotting unit:

♦ Single-axle double-knife slotter, use Internal tooth structure

adjustment the height of box So that oil does not easily contaminate cartons.

♦ The first pressure line round, after preloading cardboard not easily crushed.

♦ The above press round Urethane appearance package, will not damage the cardboard.

♦ The slotting knife a uses traverse mechanism, screw with

linear guide, to move more flexible and precise

♦ The structure of the knife holder used shaft linkage, aimed at moving to keep up upper and lower knives, prolonging tool life.

♦ Slotting phase and box height, computer, and electric digital control.

♦ Preload crease wheel, slot knife traverse position computer, and electric digital control.

♦ The interval of the slotting knife shaft is controlled by a computer and electric digital.

♦ Preload, creasing gap adjustment adopt computer and electric digital control.

♦ Slotting knife box high adjustment has collision protection device, will not damage the machine.

♦ There's the elastic corner-cutting knife, which can cut three, five, cardboard without adjusting.

4. Die-cutting unit:

♦ Rubber roller mechanical spiral commutation 50mm move

about horizontal structure.

Die-cutter phase, computer, and electric digital control.

♦ Horizontal phase, computer and electric digital control, range ±10mm.

♦ Rubber roller and die roller gap use the computer and electric digital control.

♦ Transfer roller adopts self-locking structure adjustment.

♦ The rubber roller is compensated by mechanical drive, control the speed of the rubber roller, range ±3mm.

Rubber roller shipping cutting structure, keep rubber surface roughness.