FULLY-AUTOMATIC STITCHING AND GLUING MACHINE

Machine Parameters:

Specification of stitching part:

Note:

• machine speed:50-60 pcs/min with 3 nails/pcs, according to the specification of the cardboard.
• Applying to strawboard mainly.

Specification of gluing part:

Functions and characteristics:

The machine is operated through a computer, it is easy to set orders automatically.

The PLC control system is easy to operate by touch screen man-machine interface.

The paper feeding part adopts a vacuum absorption leading-edge belt to ensure the cardboard is in the right position.

1 Gluing and folding department.

The main motor adopts a variable-frequency speed control system without noise, which is easy to adjust the speed with stability.

With imported high friction belt to convey and stack the cardboard automatically.

Adopting a stainless-steel wheel makes the gluing well-distributed, which is wasteless without fault.

The folding part equips with a cardboard correction device and an indentation correction device.

The folding part has two rows of adjustable inner positioning guide wheel system to make the forming accurate more correctly. The folding speed is between 0-150psc/min.

2 Paper feeding department

adopting the leading-edge belt suction paper feeding is more accurate and reliable.

Due to the High-grade electromagnetic clutch and electromagnetic brake system, it is safe and controlled to adjust the quantity of feeding paper without a machine halt.

The height of the presser wheel is adjustable, which is suitable for the thickness of the pressboard is 2-8 mm.

Linking with the folding part, the speed can adjust by the frequency conversion system, the feeding speed is 0-150 m/min.

The front baffle and the belt of the paper feeding part can be adjusted left and right.

3 Counting and Stacking Unit

Automatic stacking and orderly output.

The speed of the main motor can adjust by the frequency conversion system. It is stable and reliable.

The cartons are carried and stacked through the belt at the speed of 0-130m/min.

Flapping the cardboard can correct the deviations with little error.

With Pneumatic counting and putting forward, PLC electronic control, it is accurate and fast.

With PLC programmable controller and touch screen digital control, the operation is simple and reliable. Non-stop input data, and automatic counting.

The output part adopts the synchronous pressing mode of the bottom conveyor belt and upper pressing belt so that the finished carton can be firmly adhered to and neatly output without dislocation.

4 The whole unit of the stitching head is imported from Taiwan; the machine speed is 600 nails per minute.

5 The nail spacing can be adjusted arbitrarily from 30 mm to 120 mm.

6 Single nail/double nail/reinforcing nail can be done at one time, which can meet different requirements of different customers for nail species.

7 Applying to three, five, and seven layers of corrugated cardboard (special instructions for seven layers)

8 It takes only a few minutes to change the size of cartons and adjust the nail spacing of cartons, which greatly saves time and is easy to operate.