150m/min Corrugated Board Production Line 320mm Cassette Corrugated Single Facer Machine
Introduction of Single Facer Corrugated Machine
* The guide paper adopts wind absorption to maintain the stability of corrugated cord type at high speed.
* By the air blower through the vacuum box will be corrugated in the middle corrugated roller 180 degree range to form negative pressure zone, to complete the rolling of corrugated.
* Under the Corrugated roller suction groove width of not more than 2mm, can be reduced single-sided corrugated cardboard stripe traces.
* The transmission department adopts synchronous Belt drive, isolating the vibration source, making the transmission more stable, running reliably and maintaining higher.
* The use of automatic circulation of plastic, pneumatic gluing and reset, with buffering effect.
* On the surface of COTS through special screen engraving and chromium plating treatment.
Single Facer Corrugated Machine Parameter
Sheet width 2200mm Design speed: 150m/min Running speed: 120m/min | ||
Name | Configuration | Qty |
SF-LH150 Cassette type Single facer | Cassette type, corrugated roller material: tungsten carbide, diameter: ¢320mm, change corrugated roller in 10 minutes, frequency motor, electric adjust gluing width, adjust glue according to speed | 1set |
Corrugated fast change part | Ø320mm Tungsten Carbide tile corrugated roller, suction hood, tile sleeve wall panel, swivel joint | 1set |
Change roller trailer | Hydraulic synchronous lifting, electric traction walking | 1car |
![]() | ![]() |
Packaging&Shipping