Carton Printing Machine One Color Printer Slotter Die Cutter Stacker
Model:900x2000
Application

1. The mahine absorbed the characteristics of similar foreign to heavy-duty as a wide concept, and strictly in a accorance with mechanical standards, increase the selection of various pars of delivery systems,focusing on tone version,Chuan-ink,transmission structure of the reorganization.
2. control system, using the latest design concept of mechatronics,computer-phase with the planetary weeks to tune the combination version of the system to achieve non-stop adjustment , the control accuracy of 0.10millimeters
3. Delivery system, the transmission shaft and gear with free bond connecting ring and the cross slider drive mechanism to achieve seamless gear machine operation . greatly improved accuracy of the printing chromatography.
4. Chuan-ink system that uses high-precision network transmission ink roller and rubber roller, and the other and independent motor drive, beyond the clutch to ensure the shutdown stop ink, the ink pneumatic diaphragm pumps, pneumatic lift version.
5. cut-off machine, automatic locking,power walking,clutch protection
6. Transmission gear, forged 40 cr quenched and tempered, grinding tooth nitriding processing, oil pump spray lubrication, prolong the service life of the gear, ensure long-term printing color accuracy..
7. Front the good luck send a paper way.
8. The choice install rotary die-cutter machine.set

1.Printing roller
1. It adopt steel material , the surface adopts grinding and is hard chromed.
2. It has gone through dynamic revise with steady revolving.
3. It adopt ratchet wheel device to fix the printing plate roller.
4. Whole printing plate ditch , it is suitable the 9mm hang version bar.
5. Load and unload the printing plate , the step switch control the positive and negative revolving.
6. The gap between the printing roller adopts manual adjustment , the range is 0-11mm
2. Printing press roller
1. Surface of the steel tube adopt grinding and is chromed.
2. The roller has gone through the dynamic revise with steady revolving.
3. The printing press roller adopt manual adjustment , the adjusting range is 0-11mm.
4. Feeding paper roller gap adopts manual adjustment , the range is 0-11mm.
3. The metal anilox roller ( the customer choose the roller mesh number )
1. Surface of the steel tube adopt advanced hard chromium plating craft , it is hard , smooth and wear resisting.
2. Lattice point consistent , linking effect is uniformity
3. It can prolong the printing plate and rubber roller life.
4. The gap of the anilox roller adopt manual adjustment.

Rotary Die-cutting unit
1 . Die cut unit roller adopt high quality steel, plated with rigid chrome. high precision dynamic and static balance increase running stable.
2 . Mould roller and rubber roller can auto separate by cylinder eccentric device when the machine don’t die cut, this can lighten machine load and increase rubber roller and die knife life.
3 . Matching with feeding system, it with auto up and down device, the rubber roller will down when feeding paper. The rubber roller will up when stop feeding paper. To make sure every paper die cut correctly.
4 .The mechanical transmission rubber roller move 58mm in left and right side. It also with wear and tear regular could increase the life of rubber roller.
5 .Die cut phase adopt PLC touch screen, 360 degree adjust electric number.
6 .Machine with rubber amend device, the rubber roller can be used after many times amend.