Corrugated Carton Machine Flexo Printing Slotting Equipment 1628

Model:1600x2800

Description:

Standard equipments:

A. Independent Lead Edge Feeder;

B. printers

C. motorized slotter

D. Rotary Die Cutter with auto trimming device;

E. Auto Stacker

How does a rotary die cutter work?

A rotary die cutter is a machine that is commonly used in the manufacturing industry to cut out shapes from different materials such as paper, cardboard, plastic, and rubber. The machine works by making use of a rotating cylindrical die that is equipped with sharp blades. The die cuts through the material in a rotational motion, producing highly accurate and precise cuts. In this article, we will take a closer look at how a rotary die cutter works and the advantages of using this type of machine in the manufacturing process.

Lead Edge Feeder

1. Each unit is electric moving left and right with warning bell. When unit moving, the bell will be warning to make sure the operator safe. The moving motor with constant torsional moment which can buffer the impact of the two units when the operation is wrong.
2. After all the units closed, each part is pneumatic locked. There is also lead locked cylinder which can make each part locked with bottom-track lock. If the cylinder is not locked, the main motor will not work.
3. Lead edge feed system

4. The Lead edge feed unit is made in Shanghai, with long life,and high precision for feeding.
5. Wind absorbing auxiliary paperboard feeding, can make the cardboard feed favoringly. The volume of the wind can be adjusted accord the camber of the paperboard.
6. Electric and PLC control the side baffles move left and right.electric control the behind baffles move back and front.The distance between the frontal baffles and the feed table is synchronous manual adjust.

Features of printing units

1. All the rolls and shafts are made of high quality steel, with the treatment of dynamic balance correction, grinding and chromeplated.

2. The printing phase position is and horizontal movement controlled automatically by touch screen with digital display, the phase position could be adjusted CW or CCW easily with 360 degree because of the equipping of PLC and planetary gearingmechanism.

3. Equipped with ink quantity monitoring system, the machine will alarm when out of ink, and stop feedingcardboard.

4. The printing plate is hanged by the hanging plate device, the printing roll is able to clockwise rotate and counter clockwise rotate which controlled by the foot switch, it's very convenient for installation and dismounting of printingplate.

5. Manualgapadjustmentvia wormreducer withgraduateddialindicationsuchasgap betweenrubberrollandaniloxroll,gap betweenaniloxrollandprintingrolletc.

6. Equipped with electromagnetic clutch break system to fix the printing phase, when separate the printing unit for adjusting the printing phase, the break system will prevent the gear move, keep the originalposition.

Features of slotting unit

1. Phase 360 ​​degree electric planetary gear adjustment, no key link;

2. The structure adjustment of the electric inner gear of the box height;

3. Polyurethane pre-pressing plate wheel to ensure that the cardboard is not crushed;

4. The length and width of the carton are adjusted synchronously by electric motors;

5. Optional positive and negative knives;

6. Optional buttoning device, order management and other functions.

Features for Rotary Die Cutting Unit

1. The rubber cushion roller.
2. The rubber cushion roller is steel material,the surface is grinded and hard chromium plating.
3. The rubber cushion roller after balance correction.
4. Rubber cushion adopt fastening-type excellent rubber.Easy to install and uninstall. Long service life,can be cutted 4million to 6million times.
5. Adopting mechanical control the position move left and right of the rubber cushion roller.The movement distance is 40mm. This structure makes the rubber covers equally wear,which can increase the use time.
6. The automatic Pneumatic control Up-down device of the rubber cushion roller is synchronous with the cardboard feeding system.(when the cardboard is fed,the rubber cushion roller is go down and cut the cardboard,when cardboard feeding is stop,the rubber cushion roller will go up and separated from the die. )
7. The unique speed compensation device can make the fine rubber cushion roller rolling running with the die,no matter how the diameter of the rubber cushion changed,the surface speed of the rubber cushion is completely controlled by the die.This could make the shape of the carton sheet absolutely equal to the die pattern without people operation.

.