Carton Printer Slotter Die Cutter Equipment

Model:1600x3200

Lead Edge Feeder

1.Servo type None-pressure Lead edge feeder with vacuum suction, wind is adjustable depend on sheet, make sure feed sheet smoothly.
2.Main motor with start protecting device, machine cannot run when machine units aren't lock
3.Continuous or skip feeding available
4.Double feed rollers wrapped with rubber, with groove prevent overpressure, reduce pressed sheet
5.Left-right baffle adjusted by computer with automatic flap, back baffle adjusted by motorized, front baffle manual synchronous adjust.
6.Dust clearance bush and fan to clean dust on board. Air outlet can be adjusted as per sheet size
7.Machine units move by motorized and move with alarm belling to make sure safety.
8.The independent electric box controls the whole machine, and each group can control the machine alone and operate more simply

Slotter Unit

Slotting Unit Features:

● Single shaft double-knife slotting, internal gear adjust the height of the box, and the lubricating oil is not easy to contaminate the carton.

● The upper pre-pressing wheel and the creasing wheel are covered with anvil ring, and the cardboard is not easy to be crushed.

● The lateral movement of the slotting knife adopts the lead screw and the linear guide rail, and the movement is flexible and accurate.

● The upper and lower knife holders are linked by transmission shafts, the upper and lower knives are accurate and the knife life is prolonged.

● Self-locking structure is adopted for the adjustment of slotting knife seat, preloading and indentation gap.

● The height adjustment of slotting tool box has anti-collision protection device, which will not damage the machine.

● Elastic chamfering knife structure, can cut three-layer and five-layer cardboard without adjustment, easy to operate

.