Product Name: Volcanic Ash vinyl Super Gloss car wrap scratch resistant custom

Bubble Free Slideable High Gloss Volcanic Ashk Car Wrap Film Scratch Resistant Custom

Product Description:

• Car wrap film is a series of vinyl decals that are placed over the body panels of the vehicle, letting you drastically change its appearance. The design options include a standard glossy color, gradient color, matte finish, chrome metallic color, and full-on graphics treatments
• Can be easily applied to any non-porous surface with only a heat gun and squeegee. Easily repositioned or removed with no risk of chipping factory paint.
• Vinyls feature air channel release technology, allowing you to smooth it onto a surface and eliminate air bubbles for a perfect finish.

Product Specfications:

Product Features:

• Good conformability to irregular substrates
• UV, temperature, humidity, and salt-spray resistance
• Unique patented adhesive technology
• Excellent conformability around curves and recesses
• Outstanding durability and outdoor performance

Advantages of Applying Car Wrap Film:

• Vinyl car wraps wear as well as, or better than paint – when properly cared for. Think of it like a skin for your laptop or a silicon cover for your phone. The vinyl can take a beating protecting the vehicle’s paint underneath.
• Vinyl car wraps come in many colors and can have matte, semi-gloss, gloss, brushed steel, carbon fiber, matte metallic, chrome, and even leather-like finishes.
• The cost for a vinyl vehicle wrap is considerably less (nearly half) than a comparable paint job.
• You don’t have to wrap your entire car; you can just do your hood, roof, mirrors, stripes, etc.
• Warranties and/or lease agreements remain valid. Painting can void warranties and is not a lease option.
• Expensive, color-matching paint fees are unnecessary for scratches or accident vehicles; just re-wrap the section that needs repair.
• It’s difficult to tell it’s not painted.
• Hides scratch, small chips, and “freshens” the look of your vehicle.
• Vinyl car wraps protect your OEM paint and are 100% removable.
• Many of the styles can not be reproduced by paint.
• You can restore the car to its original color by removing the wrap.

Product Application:

• Trailers
• Vehicle advertising
• Cars & Vans
• Buses

FAQs:

• Will car wrap damage my car’s paint?

Actually, car wrap can protect your paint because it blocks damaging ultraviolet light. When you remove it, the original finish will be intact.

• How to remove vinyl from your car?

1. Use the heat gun to evenly heat the surface of the wrap to about 120 °F (50 °C). This will loosen the adhesive so you can pull it off. Use a non-contact infrared thermometer to confirm you aren’t overheating, which can lead to excessive adhesive residue left on the surface.

2. Pull the wrap away from the edges at a steep angle, pulling the wrap back on itself at 15 to 20 degrees. When the wrap gets hard to pull, reheat and start pulling again.

3. Finally, use Turtle Wax Label & Sticker Remover or Bug & Tar Remover to remove any adhesive residue from the surface of the panel.

• How Do You Maintain a Wrapped Car?

The best way to ensure a wrap will last is to keep the car in a garage. If you don't have a garage, invest in a good car cover. You should handwash the car with soft microfiber towels. Automatic car washes are off-limits: The harsh brushes could scratch or lift off the wrap.