Electric White Car Wrap Film Moisture-Proof, Durable And Non-Fading

Product Name: Air Release Slideable Electric white Car Wrap Film Non-fading

Product Description:

• Car wrap film is a process of transforming the color and looks of your car by applying large sheets of pressure-sensitive vinyl film to each individual panel on the car. Carbon fiber vinyl wrap film is applied with extreme precision and skill and can only be carried out by highly trained and specialized staff.
• Changes your vehicle a different look and protect the paint against fading, scratches, and chips. Vinyl car wraps are more durable and flexible than paint. Vinyls are harder to scratch and easy to replace.

Product Features:

1. Combines a colored film and protective layer in one convenient construction with fewer seams
2. Available in opaque and textured, special effect, and metallic options
3. Faster positioning and air bubble-free car wrapping film application
4. Excellent conformability around curves and recesses
5. Even the most experienced applicators are more productive, compared to the standard permanent adhesive.

Product Specfications:

Product Application:

1. Trucks
2. Emergency Vehicles
3. Trailers
4. Buses

Advantages of Applying Car Wrap Film:

1. Vinyl car wraps come in many colors and can have matte, semi-gloss, gloss, brushed steel, carbon fiber, matte metallic, chrome, and even leather-like finishes.​
2. You can restore the car to its original color by removing the wrap.
3. Warranties and/or lease agreements remain valid. Painting can void warranties and is not a lease option.
4. Expensive, color-matching paint fees are unnecessary for scratches or accident vehicles; just re-wrap the section that needs repair.
5. Vinyl car wraps protect your OEM paint and are 100% removable.
6. It’s difficult to tell it’s not painted.
7. You don’t have to wrap your entire car; you can just do your hood, roof, mirrors, stripes, etc.
8. Hides scratch, small chips, and “freshens” the look of your vehicle.

FAQs:

1 . How Do You Maintain a Wrapped Car?

The best way to ensure a wrap will last is to keep the car in a garage. If you don't have a garage, invest in a good car cover. You should handwash the car with soft microfiber towels. Automatic car washes are off-limits: The harsh brushes could scratch or lift off the wrap.

2 . How to remove vinyl from your car?

A .Finally, use Turtle Wax Label & Sticker Remover or Bug & Tar Remover to remove any adhesive residue from the surface of the panel.

B . Use the heat gun to evenly heat the surface of the wrap to about 120 °F (50 °C). This will loosen the adhesive so you can pull it off. Use a non-contact infrared thermometer to confirm you aren’t overheating, which can lead to excessive adhesive residue left on the surface.

C . Use your fingernail or plastic scraper to pull the wrap from the edges of the entire panel. It’s going to look gnarly, but it’ll all be gone in a few minutes.

D .Pull the wrap away from the edges at a steep angle, pulling the wrap back on itself at 15 to 20 degrees. When the wrap gets hard to pull, reheat and start pulling again.

3 . How long does vinyl wrap last?

Depending on the quality of the wrap, type of vinyl wrap, care taken during installing, care for installation, and environmental factors, car wraps can last from three to ten years.