Product name: Russian bayonet 130PB shank DTH drilling hammer for quarrying

Product category: Quarrying drilling bit

Matched hammer: Hammer 130PB

Connection thread: Bayonet

Impact power: 4.0

Working pressure(bar): 7~11

Outer diameter(mm): 116

Weight(KGS): 35.1

Bit diameter recommend(mm): 130~160

Russian bayonet 130PB shank DTH drilling hammer feature:

1. Patented innovation to ensure maximum energy transfer

2. Simplified design for easier servicing and higher reliability

3. high-frequency design for smoother operation

4. Hardened wear sleeve for wear resistance even in abrasive conditions

5. Multi-start threads on backhead and chuck for easy coupling/uncoupling

Russian bayonet 130PB shank DTH drilling hammer technical parameter:

How to order:

Shank Type + Top Sub Thread

FAQ:

1. What is percussion drilling method?

Percussion drilling is the manual drilling technique that was used in the first well drilled. In this drilling technique, a hammering bit is attached to a long cable that is then lowered into a wide open hole.

2. How does DTH system work?

DTH is an encrypted transmission that travels to the consumer directly through a satellite. DTH transmission is received directly by the consumer at his end through the small dish antenna. A set-top box, unlike the regular cable connection, decodes the encrypted transmission

3. Can you directional bore through rock?

One of the most significant milestones in the evolution of HDD, however, was the development of the technology. As technology has advanced, midsize drilling equipment now has the capability of effectively drilling and steering in rock.

4. Why is horizontal drilling better?

Directional or horizontal drilling allows producers more flexibility and precision in reaching and extracting oil/gas compared to vertical drilling. Horizontal drilling also reduces the ecological footprint of a drilling operation above ground by drilling in several directions from a single well pad.

More information: