Stainless Steel CF8M Lug Metal Seated High Performance Butterfly Valve 316SS BFV

Description

Lug-style valves have threaded inserts at both sides of the valve body. This allows them to be installed into a system using two sets of bolts and no nuts. The valve is installed between two flanges using a separate set of bolts for each flange. This setup permits either side of the piping system to be disconnected without disturbing the other side.

Quick Details

1. Valve Type: Stainless Steel Lug Metal Seated Butterfly Valve

2. Standard: API609

3. Pressure rating: Class 150LB -300LB - 600LB

4. Size: 2” - 60"

5. Body materials: Stainless Steel A351 CF8M

6. Disc: Stainless Steel ( A351 CF8M)

7. Stem material: Stainless Steel F316, 17 -4PH

8. Actuator: Manual, Worm gear

9. Body Design: High Performance, Triple Offset, Three- Eccentric

Features

1. The Seal Principle of Metal Seated Butterfly Valve Triple Offset

The Triple Offset Butterfly Valve provides a bi-directional bubble tight shut-off.This geometry ensures that the disc seal contacts the body seat only at the final shut-off position without rubbing or galling, providing a torque generated resilient seal with sufficient “wedging” to ensure auniform seal contact.

2. The Triple Offset Geometry
OFFSET 1 The shaft is offset behind the seat axis to allow complete sealing contact around the entire seat

OFFSET2 The shaft centerline is offset from the pipe and valve which provides interference free opening and closing of the valve

0FFSET3 The seat cone axis is offset from the shaft centerline to eliminate friction during closing and opening and to achieve uniform compressive sealing around the entire seat.

3. Friction Free Sealing for Long Cycle Life
(1) Seat is Cr13 Metal alloy or hardfaced with Stellite as standard.

(2) The gasket is spiral wound SS/Graphite for zero leakage.

(3) Seat ring forces are generated by the torque during closing uniformly around the entire circumference. The resilient seal fleses and energizes, assuming the shape of the seat. The compression forces equally distributed around the perimeter provide a tight bi-directional shut off.
The resiliency of the seal allows the valve body and disc to contract or expand, without the risk of jamming due to temperature fluctuations. It is self-adjusting.

Standards

Design and Manufacture； API 609. MSS SP-67, MSS SP-68
Inspection and Test: API S98

End flange dimension: ASME B16 5 (NPS≤24). ASME B16 47 B series
BW end dimension: ASME B16.25

Face to face and end to end； API 609

Pressure-temperature ratings: ASMF B16.34

Description

1. Materials List (Lug Type Triple Offset Butterfly Valve)

2. Main Connection Dimensions or Lug Type Butterfly Valve

Application

Metal Seated (Hard Seal) Butterfly Valve triple offset series are used in such fields as metallurgy, light industry, electric power, petrochemistry, coal gas channel etc.