Casun hybrid stepper motor nema16 39x39x20mm 100mN.m for automation equipment

The Nema16 stepper motor you described has the following specifications:

Step angle: 1.8 degrees per step
Motor size: 39 x 20mm
Rated current: 0.48A
Holding torque: 100mN.m (14.2 oz-in)
Weight: 0.12kg (4.2 oz)

Motor Specifications

Appearance

Torque Curves

Download

If our standard motor cannot meet your needs,

we can customize the motor according to your needs

Customized content includes

Step angle: The step angle can be customized to meet your specific requirements. For example, a motor with a smaller step angle (e.g., 0.9 degrees) will provide finer control of motion.

Motor size: The size of the motor can be adjusted to fit your specific application. A larger motor may provide more torque, while a smaller motor may be more compact and lightweight.

Rated current: The rated current can be customized based on your specific application requirements. A higher rated current will provide more torque, but may also generate more heat.

Holding torque: The holding torque can be customized based on your specific application requirements. A higher holding torque will allow the motor to hold a larger load.

Connector type: The connector type can be customized to match your specific application requirements. For example, you may need a motor with an aviation connector or a specific type of wiring.

Shaft type: The shaft type can be customized based on your specific application requirements. For example, you may need a motor with a longer or shorter shaft, or a motor with a different type of shaft (e.g., D-shaft or round shaft).

Options:
Encoder | Brake | Gearbox | Connector

Please click the "Get a quote" button below to tell us your requirements.