Casun Close Loop Stepper Motor 260mN.M 42x34mm Stepper Motor With Nema 17 Stepper Motor Controller

Nema17 Closed Loop Stepper Motor 260mN.m 1.26Amp with Encoder

The NEMA 17 42x34mm stepper motor with 500mN.m torque and 1024ppr (pulses per revolution) is a specific type of stepper motor commonly used in various applications such as robotics, 3D printers, CNC machines, and automation systems. Let's break down the specifications:

1. NEMA 17: This refers to the motor's standard size specification defined by the National Electrical Manufacturers Association (NEMA). It indicates the physical dimensions and mounting pattern of the motor.

2. 42x34mm: The dimensions of the motor, specifying the diameter of the motor body (42mm) and the length 34mm).

3. 2600mN.m torque: Torque is a measure of the motor's rotational force. In this case, the motor can generate a maximum torque of 260 millinewton meters (mN.m). This torque rating determines the motor's ability to drive loads and overcome resistance.

4. 1024ppr: PPR stands for pulses per revolution, which indicates the number of electrical pulses the motor receives to complete one full revolution. In this case, the motor requires 1024 pulses to complete a full 360-degree rotation.

Features:

• Bipolar or unipolar versions available

• Hybrid stepper construction

• Available in single or double shaft versions

• CE and RoHS approved

• Customizations on request

Motor Specifications

Operating Specifications

Motor

Step Angle: 1.8°

Maximum Temperature :80°C maximum

Ambient Temperature: -20 °C to 50°C

Storage Temperature -20: °C to 100°C

Humidity Range (%) :85% or less, non-condensing

Magnet Wire Insulation :Class B 130 deg C

Insulation Resistance :100M Ohm at 500 VDC

Dielectric Strength :500 VDC for 1 min

Encoder

Voltage: 5 v

Output: A + A - B + B -

Torque Curves

Submodels

Download

If our standard motor cannot meet your needs,

we can customize the motor according to your needs

Customized content includes but is not limited to special shafts, winding parameters, installation dimensions, lead wires with special requirements, connectors, etc.

Options:
Encoder | Brake | Gearbox | Shaft

Please click the "Get a quote" button below to tell us your requirements.