nema17 hybrid stepper motor 42x42x57.5mm 200mN.m Multisport motor
The Nema17 stepper motor you described has the following specifications:
Step angle: 1.8 degrees per step
Motor size: 42 x 42mm
Rated current: 0.4A
Holding torque: 2000mN.m
Weight: 0.3kg
Movement method:
1. The output shaft A can rotate (controlled by port 2);
2. The output shaft B can rotate (controlled by port 1).
Note: The above two motion modes are controlled by different ports.
Each motion mode can run independently at the same time without interfering with each other.
Motor Specifications
Step Angel | 1.8 ° |
Fram Size | 42mm |
Number of Phase | 2 Phase |
Rated Current | 0.4A |
Holding Torque | 200mN.m |
Resistance | 30ohm |
Inductance | 45mH |
Rotor Inertia | 20 g-cm² |
Motor weight | 0.3kg |
Number of leads | 4 |
Connection | Bipolar |
Appearance