Micro Linear Motor Nema8 Linear Actuator Lead Stroke 27.05mm Step Motor For Beauty Machine

A micro stepper motor with a lead screw is often used to create a linear actuator. It provides precise and controlled linear motion by converting the rotary motion of the stepper motor into linear motion through the lead screw mechanism.

1.Load Capacity: The load capacity is 25N, which means the linear actuator can handle a maximum force of 25 Newtons. This indicates the amount of weight or force the actuator can effectively move or hold without compromising its performance. It's important to consider the load requirements of your specific application to ensure the actuator can handle it.

2.Speed (200pps): The speed of 200pps indicates the maximum pulse rate at which the stepper motor can rotate. Each pulse corresponds to a step, and the speed is measured in steps per second. The actual linear speed of the actuator will depend on the lead screw pitch and the specific configuration of the system.

3.NEMA 8 Stepper Motor: The NEMA 8 designation specifies the size and mounting dimensions of the stepper motor. NEMA 8 motors are compact and typically have a smaller frame size and lower torque compared to larger NEMA sizes. They are commonly used in applications where space is limited.

Features:

• Bipolar or unipolar versions available

• Hybrid stepper construction

• Available in single or double shaft versions

• CE and RoHS approved

• Customizations on request

Motor Specifications

Operating Specifications

Step Angle: 1.8°

Maximum Temperature :80°C maximum

Ambient Temperature: -20 °C to 50°C

Storage Temperature -20: °C to 100°C

Humidity Range (%) :85% or less, non-condensing

Magnet Wire Insulation :Class B 130 deg C

Insulation Resistance :100M Ohm at 500 VDC

Dielectric Strength :500 VDC for 1 min

Shaft Radial Play:0.02Max. (450g-load)

Shaft Axial Play:0.08Max. (450g-load)

Max. radial force:28N (20mm from the flange)

Max. axial force):10N

Torque Curves

Submodels

Download

If our standard motor cannot meet your needs,

we can customize the motor according to your needs

Customized content includes but is not limited to special shafts, winding parameters, installation dimensions, lead wires with special requirements, connectors, etc.

Options:
Encoder | Brake | Gearbox | Shaft

Please click the "Get a quote" button below to tell us your requirements.