The stepper motor itself has the characteristic of open-loop control, which can achieve precise step angle control.
The deceleration stepper motor can provide sufficient force to drive heavy loads without causing motor overload or stall.
Features:
Step Angel
| 1.8 ° |
Fram Size
| 57 mm |
Number of Phase
| 2 Phase |
Rated Current
| 2.8 A |
Holding Torque
| 1250mN.m |
Resistance
| 0.9 hm |
Inductance
| 2.5 mH |
Rotor Inertia
| 260 g-cm² |
Motor weight
| 1.1 kg |
Gear Reduction Ratio
| 4.25:1 |
Connection
| Bipolar |
Motor
Step Angle: 1.8°
Maximum Temperature :80°C maximum
Ambient Temperature: -20 °C to 50°C
Storage Temperature -20: °C to 100°C
Humidity Range (%) :85% or less, non-condensing
Magnet Wire Insulation :Class B 130 deg C
Insulation Resistance :100M Ohm at 500 VDC
Dielectric Strength :500 VDC for 1 min
Gear Box
Housing Material:Metal
Bearing at Output:Ball Bearings
Max.Radial Load(12mm from flange):≤250N
Max.Shaft Axial Load:≤100N
Radial Play of Shaft (near to Flange):≤0.08m
Axial Play of Shaft:≤0.4mm
Backlash at No-load:≤2.5°
Motor Length | Length of Gearbox | Raio | Efficiency | ||
41 mm 54 mm 76 mm 83 mm 100 mm | 48 mm | 3.6 | 90% | ||
4.25 | |||||
60 mm | 12.96 | 80% | |||
15.3 | |||||
18.1 | |||||
72 mm | 46.66 | 70% | |||
55.08 | |||||
65.025 | |||||
76.77 |
Download