4TNV94 Yanmar Engine Parts Cylinder Liner , Antirust Custom Cylinder Sleeves

OKJ Parts 4TNV94 Cylinder Liner for Yanmar Engine Agriculture Diesel Engine Spare Parts

Process flow

Cylinder barrels: blanking - thick car - heat treatment (conditioning) -- -- -- -- -- car (flat head chamfering), coarse push inner hole - rolling inner hole - car (external circular open nest) - check hole inside the car - welding cylinder bottom - car (cylindrical) according to the need and internal zinc plated or chrome plated

Knocking symptom

Diesel generator in the operation process of the symptoms of cylinder knock is: from medium to low speed, will give out a heavier sound of cylinder knock, diesel generator set exhaust pipe black smoke, and sometimes set off the sound of guns or fire out, engine body overheating.

Product Description

Common problems

Cylinder pulling phenomenon:

Scuffing damage mechanism of most local damage due to sliding parts of lubricating oil membrane, the surface of the relative movement between the two prominent parts metal contact occurs first, and then local appear tiny "burning-out" phenomenon, and burning-out parts due to the components of relative motion and torn apart.

In the process of the metal surface hardening layer, when the destruction of hardening layer, produced by the metal abrasive will be adding surface wear mo materials.

In the event of a so-called "burning-out wear" in a short period of time, appear on the piston and cylinder liner surface and the center line of the cylinder parallel rough grinding mark, this is the scuffing phenomenon.

Serious when sliding parts sticking or completely Stuck and may even produce cracks in the two weak parts of the surface to cause mechanical damage, that is, to bite the cylinder.

Therefore, the root cause of the cylinder is melting wear.

Our Advantages
1. Technical experts take in charge of making drawing for the sample offered by clients.

2. Experience in engine parts for over 15 years and served customers all around the world.

3. We have the professional equipment for inspection and measurement. Each piece should be strictly tested.

4. We have our own factory to provide you the competitive price with a good quality.

FAQ

Q1: How do you control the quality of the products?

A1: We have the professional measurement and inspection equipment.Every process of the production is strictly controlled. And all products will be inspected by QC before shipment.

Q2: Can we print our company logo on product and package?

A2: Yes, but the quantity of the order is required. And we need you to offer the Trademark Authorization to us.

Q3: What is your MOQ?

A3: We do not have MOQ . We accept lower quantity for your trial order.

Our Product Range