The new waterproof WAT-400D camera utilizes true color producing technology housed in a fully submergable housing. With over 450TVL of color resolution this camera is the perfect choice for your outside use applications.
Watec WAT-400D Camera Features:
* Built-in lens automatic white balance;
* Resolution: 450TVL;
* Minimum illumination 2.0Lx. F1.6;
* Waterproof IPX8.
* One-cable system (Video/power transmission)
Watec WAT-400D Camera Specifications:
Model | WAT-400D(NTSC) | WAT-400D(PAL) |
Image Sensor | 1/3" CCD | |
total pixels | 811(H)*508(V) | 795(H)*596(V) |
Effective Pixels | 768(H)*494(V) | 752(H)*582(V) |
Pixel Size | 6.4um(H)*7.5um(V) | 6.5um(H)*6.3um(V) |
imaging system | Ye, Cy, Mg, and G complementary color mosaic filters on chip | |
Synchronization mode | internal synchronization | |
Scanning system | 2:1 interlaced scanning | |
video output | synthesize,Y/C:1.0 V(P-P),75Ω,imbalance | |
resolution ratio(H) | More than 450 TVL(Center) | |
minimum illumination | 2.0lx. F1.6 | |
S/N | More than 50dB(AGC=3dB,γ= 1.0) | |
AE (automatic exposure) | 1/60 sec. | 1/50 sec. |
WB | ATW | |
automatic gain control | 3-24dB | |
Gamma Features : | γ≒0.45 | |
BLC | ON | |
Power voltage | DC + 15V±10% | |
power consumption | 2.03W(135mA) | |
Maximum cable length | RG-58/U,200m | |
Built-in cable length | RG-58/U,10m | |
Operating Temperature | -10 - +50℃(Frost-free knot) | |
Storage Temperature | -30 - +70℃(Frost-free knot) | |
Work /Storage humidity | Lower than 95%RH | |
Built-Lens | Auto iris lens control (F = 2.8 F =1.6) | |
Weight | About 900G(Including the RG-58/U 10m cable) |
Optional factory Settings
Model | WAT-400D(NTSC) | WAT-400D(PAL) | |
AE | Adjustable shutter speed | 1/60,1/100 sec. | 1/50,1/120 sec. |
1/250,1/500,1/1000,1/2000,1/5000,1/10000,1/20000,1/50000.sec | |||
WB | ATW,Preset(3200K,5100K,8200K) | ||
Mirror Horizontally | ON/OFF |
* Maximum cable length should be 200 m, using RG-58 / U cables to ensure adequate electrical properties, but not guaranteed waterproof.