Quick Detail:

• 2:1 Single Wall Heat Shrink Tube
• -55℃ to 135℃
• W-1-HL(2X,3X)
• RoHS Compliant
• Felxible
• Flame Retardant
• Shrink temperature: 120℃

Description:

Heat shrink tubing (or, commonly, heat shrink or heatshrink) is a mechanically expanded

extruded plastic tube ordinarily made of nylon or polyolefin, which shrinks in one plane

only (its diameter) when heated, to between one-half and one-sixth of its diameter.

Heat shrink tubing is manufactured in a multitude of varieties and chemical makeups

with the exact composition of each type being dependent on the intended application.

From near microscopically-thin-wall tubing to rigid, heavy-wall tubing, each type

has precise design and chemical additives that make it suitable for meeting any of

a wide variety of environmental demands. Heat shrink tubing is rated by its

expansion ratio, a comparison of the differences in expansion and recovery rate.

Heat shrink is used to insulate wires, providing abrasion resistance and environmental

protection for stranded and solid wire conductors, connections, joints and terminals

in electrical engineering. It can also be used to repair the insulation on wires or to

bundle them together, to protect wires or small parts from minor abrasion, and to

create cable entry seals, offering environmental sealing protection.

Applications:

Different applications require different materials:

PTFE (fluoropolymer) tubes have a wide operating temperature range (-55 to 175 °C),

a low coefficient offriction, and high resistance to chemicals and punctures.

Viton, another fluoropolymer with high chemical resistance, is widely used in hydraulic equipment.

It is highlyflexible, with a very wide operating temperature range of -55 to 220 °C,

making it suitable for protecting sensitive devices against heat.

Polyvinylidene fluoride (PVDF) tubes are intended for high temperature applications.

Fluorinated ethylene propylene (FEP) is a lower-cost alternative to PTFE.

Elastomeric tubes maintain high flexibility even at low temperatures and

meet stringent international specifications. Their operating temperature range is -75 to 150°C.

The material is resistant to many chemicals (including diesel and petrol)

and has good resistance to abrasion, even in severe environmentalconditions.

A common shrink ratio is 2:1

Silicone rubber offers excellent resistance to scrape abrasion and high flexibility.

Their operating temperature range is -50 to 200°C[citation needed]

Polyolefin tubes, the most common kind, have maximum continuous-use temperatures

from -55 to 135 °C, and are used by the military, aerospace and railway industries.

They are flexible and fastshrinking, and manufactured in a wide rangeof colors (including clear),

which can be used for color-coding wires.With the exception of black,

they tend to have lower resistance to ultraviolet light;

accordingly, only black is recommended for outdoor applications.

A common shrink ratio is 2:1, but highgrade polyolefin heat

shrink is also available with a 3:1 ratio.

PVC tubes are available in several colors and can be used outdoors.[citation needed]

2:1 Yellow-Green Single Wall Heat Shrink Tube W-1-HL -55℃ to 125℃ RoHS Compliant
Specification
W-1-HL(2X)
Size	As supplied (mm)		After Recovery (mm)		Standard Package
(mm)	Internal Diameter	Wall Thickness	Internal diameter	Wall thickness	(m/spool)
Φ1.0	1.5±0.3	0.15±0.08	≤0.65	0.28±0.10	200
Φ1.5	2.0±0.3	0.18±0.08	≤0.85	0.32±0.10	200
Φ2.0	2.5±0.3	0.18±0.08	≤1.00	0.4±0.10	200
Φ2.5	3.0±0.3	0.18±0.08	≤1.30	0.4±0.10	200
Φ3.0	3.5±0.4	0.18±0.08	≤1.50	0.4±0.10	200
Φ3.5	4.0±0.4	0.22±0.08	≤1.80	0.42±0.10	200
Φ4.0	4.5±0.4	0.25±0.08	≤2.00	0.45±0.10	200
Φ4.5	5.0±0.4	0.25±0.08	≤2.30	0.50±0.10	100
Φ5.0	5.5±0.4	0.25±0.08	≤2.50	0.55±0.10	100
Φ6.0	6.5±0.4	0.28±0.08	≤3.00	0.55±0.10	100
Φ7.0	7.5±0.4	0.28±0.08	≤3.50	0.55±0.10	100
Φ8.0	8.5±0.5	0.28±0.10	≤4.00	0.6±0.10	100
Φ9.0	9.5±0.5	0.30±0.10	≤4.50	0.6±0.10	100
Φ10	10.5±0.5	0.30±0.10	≤5.00	0.6±0.10	100
Φ11	11.5±0.5	0.30±0.10	≤5.50	0.6±0.10	100
Φ12	12.5±0.5	0.30±0.10	≤6.00	0.65±0.10	100
Φ13	13.5±0.5	0.35±0.12	≤6.50	0.65±0.10	100
Φ14	14.5±0.5	0.35±0.12	≤7.00	0.7±0.10	100
Φ15	15.5±0.6	0.40±0.12	≤7.50	0.75±0.10	100
Φ16	17.0±0.6	0.40±0.12	≤8.00	0.75±0.10	100
Φ17	17.5±0.6	0.40±0.12	≤8.50	0.75±0.10	100
Φ18	19.0±0.7	0.40±0.15	≤9.00	0.8±0.15	100
Φ20	22.0±0.7	0.40±0.15	≤10.00	0.82±0.15	100
Φ22	24.0±0.7	0.40±0.15	≤11.00	0.82±0.15	100
Φ25	26.0±0.7	0.55±0.15	≤12.50	1±0.15	50
Φ28	29.0±0.7	0.55±0.15	≤14.00	1±0.15	50
Φ30	31.5±0.7	0.55±0.15	≤15.00	1.05±0.15	50
Φ35	36.5±0.7	0.55±0.15	≤17.50	1.15±0.15	50
Φ40	41.5±0.7	0.55±0.15	≤20.00	1.20±0.15	50
Φ45	46.0±0.7	0.55±0.15	≤22.50	1.20±0.15	25
Φ50	51.0±0.7	0.55±0.15	≤25.00	1.20±0.15	25
Φ60	≥60	0.60±0.15	≤30.00	1.5±0.2	25
Φ70	≥70	0.65±0.15	≤35.00	1.6±0.2	25
Φ80	≥80	0.70±0.15	≤40.00	1.7±0.2	25
Φ90	≥90	0.75±0.15	≤45.00	1.9±0.2	25
Φ100	≥100	0.80±0.20	≤50.00	2.10±0.2	25
Φ120	≥120	0.85±0.20	≤60.00	2.20±0.2	25
Product tags yellow green heat shrinkable tube , red heat shrinkable tube , heat shrink tube transparent Send your message to this supplier Message* Email* Phone or WhatsApp* Name Company Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Send Now Submission successful! Green Single Wall Heat Shrink Tube W-1-HL -55℃ to 135℃ RoHS Ask Latest Price Product Detail Place of Origin : China Brand Name : KINGTONE OEM Certification : CE,RoHS,VDE,UL,CUL,LPCB Model Number : 2：1 Yellow/Green Single Wall Heat Shrink Tube W-1-HL -55℃ to 135℃ RoHS MOQ : 100M Packaging Details : 500FT/1000FT Plastic/Wooden Spool Contact Supplier HANGZHOU ZION COMMUNICATION CO.,LTD Site Member 12 Years zhejiang Since 1999 Business Type : Manufacturer, Exporter Main Products : CCTV Coaxial Cable, CATV Coaxial Cable, Signal Coaxial Cable Total Annual : 9000000- 10000000 Employee Number : 50~100 Certification Level : Site Member Discover similar products KT2300 Heat Shrink Tubing (M23053/2,CL2) 2:1 PVC Low -Cost Contact Now Black Dual wall adhesive lined heat shrink polyolefin tubing W-1-SB(2X) Contact Now adhesive lined heat shrink polyolefin tubing W-1-SB(3X) Contact Now Single Wall Heat Shrink Tube W-1-PT -55℃ to 125℃ RoHS Compliant Contact Now Dual wall adhesive lined heat shrink polyolefin tubing Contact Now Single Wall Heat Shrink Tube RSFR-135G(2X) -55℃ to 135℃ RoHS Contact Now PVDF Heat Shrink Tube RSFR-105 with 105℃Shrink temperature , ROHS Certificate Contact Now Yellow Green PTFE Heat Shrink Tube W-1-PTCB Ultra thin wall for puncture Contact Now Flexible thick adhesive lined dual wall heat shrinkable tube SBRS-3X GLX Contact Now Black Adhesive lined heat shrinkable tube for automotive oil-pipe protection Contact Now View More Find Similar Products By Category: Supplier Homepage Products MachineU China Products Packaging & Printing Plastic Packaging Plastic Tube Contact Supplier Message* Email* Phone or WhatsApp* Name Company Submit Requirement Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Submitted successfully! Your request message has been successfully sent to the supplier. Please keep in touch and they will contact you as soon as possible. OK