SBR Enamel Bolted Wastewater Liquid Storage Tank In Large Size

Why will you select enamel bolted tank as wastewater tank ?

1. The corrosion is excellent : glass fused to steel tank with the advantages of both glass and steel , the glass has excellent corrosion resistance and the steel has the hardness and flexibility . Enamel frit spary on Ti –rich ART 310 steel sheet ,which make a hardness and inert on it’s surface , so that the corrosion of it is better than any other tanks .

2. Easy to assemble : It is no need the big equipment to do the erection , which assembled by high corrosion bolts ( HDG bolts or SS bolts ) and sealant . The jacks are needed to use during the erection , we assemble it from the top to bottom one by one with jacks .

3. No subject to weather and site condition : Now matter how hard the weather is , glass fused to steel tank can be erect there ( hot weather or low weather ) . in the meanwhile , there is also no conditions of the sites , it can be installed above ground , under ground , indoor even on the roof

4. Low cost : there is no need many people to do it , and the construction time is short , once installation the maintance cost is minimal .

Comparation of enamel tanks and other tanks

Specification of glass fused to steel tank

1. Steel plates thickness : 3mm - 12mm , depends on the diameter & height

2. Coating thickness : 0.25mm - 0.4mm, two coating internal and external

3. Acid and alkalinity proof : standard coating suits for PH3 - PH11 , special 4. coating suits for PH1 - PH14

5. Adhesion : 3,450N/cm

6. Elastic : same as steel sheet , around 500KN/mm

7. Hardness : 6.0 Mohs

8. Service life : >30 years

9. Spark test : >1500 V

10. Permeability : gas and liquid impermeable

11. Easy yo clean : smooth , glossy , inert , anti-adhesion