K Type Reciprocating Feeder For Coal, Mining, Cement, Power Industries
Product Description
K type reciprocating feeder use crank linkage drag the floor with down dip 5 °do straight reciprocating motion in a roll, thus the coal or other abrasive small, sticky little of loose granular, powdery materials from the feeding equipment evenly unloaded into the subject material equipment. This machine is widely used in the storage bunker, the material pit that require uniform discharge equipment.
Main Features
1. It can be regulated the crank position, so as to achieve adjustment of feeding capacity through adjusting the floor itinerary.
2. Feeder tray mounted on the standard steel channel fabricated frame at an inclination of 5 to 10 degrees for better feeding results.
3. Adjustable reciprocating stroke length up to 300 mm.
4. Tray and side walls are lined with wear resistant plate for longer life
5. High capacity model designed with twin eccentric disc as well as crank-lever mechanism.
Main Parameters
Model | K-0 | K-1 | K-2 | K-3 | K-4 | ||||||||
Capacity (t/h) | bottom plate space (mm) | Location of crank | hard coal | soft coal | hard coal | soft coal | hard coal | soft coal | hard coal | soft coal | hard coal | soft coal | |
200 | 4 | 100 | 90 | 150 | 135 | 225 | 200 | 330 | 300 | 590 | 530 | ||
150 | 3 | 75 | 67 | 112 | 100 | 170 | 150 | 247 | 220 | 440 | 395 | ||
100 | 2 | 50 | 45 | 75 | 68 | 133 | 100 | 165 | 150 | 295 | 268 | ||
50 | 1 | 25 | 22 | 39 | 34 | 55 | 50 | 83 | 75 | 148 | 132 | ||
Speed of crank(r/min) | 57 | 57 | 52 | 62 | 62 | ||||||||
Motor | Type | Y160M1-8 | Y160M1-8 | Y160M1-8 | Y160M-6 | Y200L1-6 | |||||||
Power (Kw) | 4 | 4 | 4 | 7.5 | 18.5 | ||||||||
Speed(r/min) | 720 | 720 | 720 | 970 | 970 | ||||||||
Max feed size(mm) | Below 10% content | 250 | 350 | 400 | 500 | 700 | |||||||
Above 10% content | 200 | 300 | 350 | 450 | 550 |
Field Usage